CI-132IS
2 port RS-422/485 board, 921.6 Kbps, male DB9, isolation protection (2 KV) and surge protection (25 KV ESD)
Bisogno di aiuto?
Features and Benefits
- Economical RS-422/485 ISA boards with two DB9 male connectors on the board for easy wiring
- RS-485 data direction control with ADDC® or by RTS
- 921.6 kbps maximum baudrate for super fast data transmission
- 16-byte FIFO and on-chip hardware flow control
- Surge protection and electrical isolation available
- Built-in termination resistors
Introduction
The CI-132 series ISA boards come with 2 independent RS-422/485 serial ports for connecting data acquisition equipment and other serial devices to a PC. Connect your devices over longer distances—up to 1.2 km (4000 ft)—and ensure greater reliability in industrial environments with on-board surge protection and electrical isolation (available with some models). Enjoy greater versatility by using point-to-point full duplex connections, or set up a half duplex RS-485 multi-drop network.
Hardware
Comm. Controller: 16C550C or compatible x 2
Bus: 16-bit ISA
Connectors: DB9 male x 2
Serial Interface
Number of Ports: 2
Serial Standards: RS-422/485
Max. No. of Boards per PC: 4
Serial Line Protection
ESD Protection: 25 kV on the board (CI-132IS only)
Electrical Isolation: 2 kV (CI-132I/IS only)
Performance
Baudrate: 50 bps to 921.6 kbps
Built-in Termination Resistor: 120 ohm (enabled by jumper for RS-485-2w)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
I/O Address: 0x0000-0xFFFF (default = 0x180)
IRQ: 2 (9), 3, 4, 5, 7, 10 (default), 11, 12, 15
Serial Signals
RS-422: TxD+(B), TxD-(A), RxD+(B), RxD-(A), RTS+(B), RTS-(A), CTS+(B), CTS-(A), GND
RS-485-2w: Data+(B), Data-(A), GND
RS-485 Data Control: ADDC® (automatic data direction control), or by RTS
Operating Systems
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), DOS, Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers: QNX 6, SCO OpenServer, UnixWare 7, Solaris 10, FreeBSD
Linux Real TTY Drivers: Linux 2.4.x, 2.6.x
Physical Characteristics
Dimensions:
CI-132: 75 x 157 mm (2.95 x 6.18 in)
CI-132I/IS: 105 x 157 mm (4.13 x 6.18 in)
Environmental Limits
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -20 to 85°C (-4 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m
Standards and Certifications
EMC: CE, FCC
EMI: EN 55022, FCC Part 15 Subpart B Class B
EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4
Green Product: RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time: 441,015 hrs
Database: Telcordia (Bellcore), GB
Power Requirements
Power Consumption:
CI-132: 240 mA max. @ +5 V
CI-132I/IS: 620 mA max. @ +5 V
Warranty
Warranty Period: 5 years