FNSW-1600P Planet Unmanaged POE

 Centralized Power Distribution for Fast Ethernet PoE Networking 

To fulfill the needs of higher power required PoE network applications with 10/100Mbps transmission, PLANET FNSW-1600P’s PoE power output is upgraded from IEEE 802.3af PoE to IEEE 802.3at PoE+. It features 16 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector function that combines up to 30 watts of power output and data per port over one Cat5E/6 Ethernet cable. It is specifically designed for powered devices (PDs) such as PTZ cameras that consume high power. 

Maximum Wire-speed Throughput 

The FNSW-1600P features a high-performance switch architecture capable of providing the non-blocking 3.2Gbps switch fabric and wire-speed throughput as high as 2.38Mpps, thus increasing the bandwidth demand for LANs. Besides, the 802.3x full-duplex flow control function of the FNSW-1600P enables PDs and servers to be directly connected to the Switch for wire-speed packet transfer without the risk of packet loss.

Easy and Cost-effective Network Deployment

With the simultaneous transmission of data and power over Ethernet over a cable, the FNSW-1600P does not need extra cables and electrical outlets on the wall, ceiling or any unreachable place for extended network deployments. It thus helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians. With a total power budget of 125 watts, the FNSW-1600P is ideal for small businesses and workgroups wanting to deploy a PoE network equipped with wireless access points, IP surveillance cameras and IP phones in any places easily and efficiently.

Applications

Power Centrally Controlled

Providing 16 802.3at PoE+ in-line power interfaces, the FNSW-1600P can easily build a power that centrally controls IP phone system, IP camera system and wireless AP group for enterprises. IP cameras can be installed around the corner in the company or campus for surveillance demands. Wireless APs can be deployed to build a wireless roaming environment. Without the need for electrical outlets, the Switch makes the installation of cameras and wireless APs easier and more efficient.

Features and Benefits

Physical Port

• 16 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/End-span PSE
• Supports PoE power up to 30 watts for each PoE port
• 125W PoE power budget 
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

Switching

• Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• Automatic address learning and address aging 

Case and Installation

• 19-inch desktop size, 1U height
• LED indicators for PoE ready, PoE activity
• Rack-mountable, Plug-and-Play installation

Specifications

Hardware Specifications 

Hardware Version: 4
Copper Ports: 16 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
PoE Inject Port: 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
LED Indicators: System:
　Power(Green)
Port 1 to Port 16:
　10/100 LNK/ACT (Green)
　PoE-in-Use (Orange)
Switch Architecture: Store-and-Forward
Address Table: 8K entries, automatic source address learning and aging
Switch Fabric: 3.2Gbps/non-blocking
Throughput (packet per second): 2.38Mpps@64 bytes
Power Requirements: AC 100~240V, 50/60Hz, 2A max.
Power Consumption: Max. 128.4 watts/440.54 BTU
Dimensions (W x D x H): 445 x 207 x 45 mm
Weight: 2330g

Power over Ethernet

PoE Standard: IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type: End-span
PoE Power Output: Per port 52V DC ( max.30.8 watts)
Power Pin Assignment: 1/2(+), 3/(-)
PoE Power Budget: 125 watts

Standards Conformance

Regulatory Compliance: FCC Part 15 Class A, CE
Standards Compliance: 
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus

Environment

Operating: Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage: Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)