IA260-T-LX
RISC-based Embedded Computer with VGA, 4 Serial Ports, Dual LANs, DIO, CompactFlash, USB, Linux 2.6, Wide Temperature
Bisogno di aiuto?
Features and Benefits
- Moxa M2M Coloud Computing for Industrial IoT Cirrus Logic EP9315 ARM9 CPU, 200 MHz
- 128 MB RAM on-board, 32 MB flash disk
- 4 software-selectable RS-232/422/485 serial ports
- VGA interface for field site monitoring
- Dual 10/100 Mbps Ethernet for network redundancy
- 8+8 DI/DO channels, up to 30 VDC
- 12 to 48 VDC power input design
- Supports CompactFlash and USB 2.0 hosts
- Ready-to-run Linux/WinCE 6.0 platform
- -40 to 75°C wide temperature models available
Introduction
The IA260 embedded computer comes with 4 RS-232/422/485 serial ports, dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, industrial-strength aluminum case. The IA260 computer uses the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA260. With its built-in VGA output interface, the IA260 is suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features. The IA260 computer supports RS-232/422/485, digital I/O, and has dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard model, wide temperature (-40 to 75°C) model is available for use in harsh industrial automation environments. The IA260 embedded computers come pre-installed with either the open standard Linux OS, or the more common WinCE OS. Software written for a desktop PC can be easily ported to the IA260 platform by using a common compiler, without needing to modify the code, and the software you develop for your own applications can be stored in the IA260’s flash memory.
Computer
CPU: Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed): Windows CE 6.0 or Linux
DRAM: 128 MB onboard
Flash: 32 MB onboard
USB: USB 2.0 compliant hosts x 2, type A connector
Storage
Storage Expansion: CompactFlash slot
Display
Graphics Controller: EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory: Dynamic video memory (shares system memory)
Display Interface: CRT interface for VGA output, DB15 female connector
Resolution: 1024 x 768, 8 bits
Ethernet Interface
LAN: 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 kV built-in
Serial Interface
Serial Standards: 4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection: 4 kV for all signals
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 kbps (supports non-standard baudrates; see user's manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 8, source type
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
Logic level 0: Close to GND
Logic level 1: Open
Digital Input Levels for Wet Contacts:
Logic level 0: +3 V max.
Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw terminal block (8 points, COM, GND)
Isolation: 3 kV optical isolation
Digital Output
Output Channels: 8, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 9-pin screw terminal block
Isolation: 3 kV optical isolation
LEDs
System: Power, Ready, Storage
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 4, RxD x 4
Switches and Buttons
Reset Button: Supports "Reset to Factory Default"
Physical Characteristics
Housing: Aluminum, industrial vertical form factor
Weight: 1 kg
Dimensions: 52 x 112.6 x 162 mm (2.05 x 4.43 x 6.38 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 12 to 48 VDC (3-pin terminal block)
Power Consumption:
With no load on USB ports: 5.8 W
240 mA @ 24 VDC
480 mA @ 12 VDC
With full load on USB ports: 11 W
450 mA @ 24 VDC
900 mA @ 12 VDC
Standards and Certifications
Safety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC (GB4943, GB9254, GB17625.1)
EMC: EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A
Green Product: RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 145,328 hrs
Warranty
Warranty Period: 5 years
Linux
OS: Linux 2.6.23
File System: JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite: TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security: OpenVPN, iptables firewall
Web Server (Apache): Allows you to create and manage web sites
Terminal Server (SSH): Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking: PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and (
Watchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software:
Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
GNU C/C++ cross-compiler
GNU C library
GDB source-level debugging server
Software Protection: Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS: Windows Embedded CE 6.0
File System: FAT (for on-board flash)
Internet Protocol Suite: TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS): Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking: Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
File Server: Enables remote clients to access files and other resources over the network
Watchdog: Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software:
Moxa WinCE 6.0 SDK
Moxa API Library
C Libraries and Run-times
Component Services (COM and DCOM)
Microsoft® .NET Compact Framework 2.0
XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
SOAP Toolkit Client
Winsock2.2