IA261-I-T-CE MOXA rugged din rail

Features and Benefits

• Cirrus Logic EP9315 ARM9 CPU, 200 MHz
• 128 MB RAM on-board, 32 MB flash disk
• VGA interface for field site monitoring
• 2 KV digitally isolated RS-232/422/485 serial ports
• Dual 10/100 Mbps Ethernet for network redundancy
• Dual 2 KV digitally isolated CAN ports with CANopen protocol support
• 8+8 DI/DO with 3 KV optical isolation protection
• 12 to 48 VDC redundant power input design
• Supports CompactFlash and USB 2.0 hosts
• Ready-to-run Linux or WinCE 6.0 platform
• -40 to 75°C wide temperature models available

Introduction

The IA261-I/262-I embedded computers come with 2 (IA262-I) or 4 (IA261) RS-232/422/485 serial ports, dual CANbus ports (IA262-I only), dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrialstrength aluminum case. The IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM provide enough memory to run your application software directly on the IA261-I/262-I. With its built-in VGA output interface, the IA261-I/262-I are suitable for use with SCADA systems in industrial applications, such as manufacturing automation, production line process monitoring, and mining automation, that require VGA and HMI features. The IA261-I/262-I computers support RS-232/422/485, CANbus, digital I/O, come with 2 KV isolation protection, and have dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments. The IA260 embedded computers come pre-installed with either the open standard Linux OS, or the more common WinCE OS. Software written for a desktop PC can be easily ported to the IA260 platform by using a common compiler, without needing to modify the code, and the software you develop for your own applications can be stored in the IA260’s flash memory

Computer

CPU: Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed): Windows CE 6.0 or Linux
DRAM: 128 MB onboard
Flash: 32 MB onboard
USB: USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors

Storage

Storage Expansion: CompactFlash slot

Display

Graphics Controller: EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory: Dynamic video memory (shares system memory)
Display Interface: CRT interface for VGA output, DB15 female connector
Resolution: 1024 x 768, 8 bits

Ethernet Interface

LAN: 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 kV built-in

Serial Interface

Serial Standards: 2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection: 4 kV for all signals
Isolation: 2 kV digital isolation
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)

Serial Communication Parameters

Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 kbps (supports non-standard baudrates; see user's manual for details)

Serial Signals

RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND

Digital Input

Input Channels: 8, source type
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
     Logic level 0: Close to GND
     Logic level 1: Open
Digital Input Levels for Wet Contacts:
     Logic level 0: +3 V max.
     Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw terminal block (8 points, COM, GND)
Isolation: 3 kV optical isolation

Digital Output

Output Channels: 8, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 9-pin screw terminal block (8 points, GND)
Isolation: 3 kV optical isolation

CANbus Communication (IA262 CE models only)

Interface: Dual optically isolated CAN2.0A/2.0B compliant ports
CAN Controller: Phillips SJA1000T
Signals: CAN-H, CAN-L
Isolation: 2 kV digital isolation
Speed: 10 kbps to 1 Mbps
Connector Type: DB9 male

LEDs

System: Power, Ready, Storage
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 4, RxD x 4
IA261-I: P1 to P4 for serial ports
IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports

Switches and Buttons

Reset Button: Supports "Reset to Factory Default"

Physical Characteristics

Housing: Aluminum, industrial vertical form factor
Weight: 950 g
Dimensions: 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)
Mounting: DIN rail, wall

Environmental Limits

Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
     Standard Models: -20 to 80°C (-4 to 176°F)
     Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: 5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock: 50 g @ IEC-68-2-27, half sine wave, 11 ms

Power Requirements

Input Voltage: Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread)
Power Consumption:
     With no load on USB ports: 5.8 W
          240 mA @ 24 VDC
          480 mA @ 12 VDC
     With full load on USB ports: 11 W
          450 mA @ 24 VDC
          900 mA @ 12 VDC

Standards and Certifications

Safety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC: EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A
Green Product: RoHS, CRoHS, WEEE

Reliability

Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
     IA261-I: 118,752 hrs
     IA261-I: 131,832 hrs

Warranty

Warranty Period: 5 years

Linux

OS: Linux 2.6.23
File System: JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite: TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security: OpenVPN, iptables firewall
Web Server (Apache): Allows you to create and manage web sites
Terminal Server (SSH): Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking: PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with 'chat', 'dip', and 'diald', among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
Watchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software: 
     Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
     GNU C/C++ cross-compiler
     GNU C library
     GDB source-level debugging server
Software Protection: Encryption tool for user executable files (based on patented Moxa technology)

Windows Embedded CE 6.0

OS: Windows Embedded CE 6.0
File System: FAT (for on-board flash)
Internet Protocol Suite: TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS): Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking: Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
File Server: Enables remote clients to access files and other resources over the network
Watchdog: Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software:
     Moxa WinCE 6.0 SDK
     Moxa API Library
     C Libraries and Run-times
     Component Services (COM and DCOM)
     Microsoft® .NET Compact Framework 2.0
     XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
     SOAP Toolkit Client
     Winsock 2.2