IEX-402-VDSL2 MOXA DSL Extender

Features and Benefits

• Automatic CO/CPE negotiation reduces configuration time
• Turbo mode connection, up to 15.3 Mbps over twisted-pair copper wires
• Link Fault Pass-through (LFP) support and interoperable with Turbo Ring and Turbo Chain
• Link quality indicators for simple troubleshooting
• Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXviewExtend industrial Ethernet over existing copper wires

Introduction

The IEX-402 series is an industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on G.SHDSL.bis and VDSL2 standards. The IEX-402-SHDSL supports data rates of up to 15.3 Mbps with a long transmission distance of up to 8 km, while the IEX-402-VDSL2 provides data rates of up to 100 Mbps with transmission distance of up to 3 km. The IEX-402 series is designed for use in harsh operating environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power input make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 series uses CO/CPE auto negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. Advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick trouble shooting.

Technology

Standards: 
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X)
     IEEE 802.3x for Flow Control
     IEEE 802.1p for Class of Service
ITU-T G.991.2 for Single-pair high-speed digital subscriber line transceivers
Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, Syslog, LLDP, Modbus/TCP
MIB: MIB-II
Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch Properties

MAC Table Size: 1K
Packet Buffer Size: 512K

Interface

DSL Port: DSL Port: RJ-11(RJ-45 connector) or detachable 2-contact terminal block
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: CO/CPE, SNR/SPEED, ANNEX B/ANNEX A, STD/TURBO
Button: Reset button
LED Indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)

Power Requirements

Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current: 0.36A @ 24 V
Overload Current Protection: Present
Connection: 2 removable 2-contact terminal block
Reverse Polarity Protection: Present

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
Weight: 290 g
Installation: DIN-rail mounting, wall mounting (with optional kit)
Altitude: Up to 2000 m

Environmental Limits

Operating Temperature: 
     Standard Models: -10 to 60°C (14 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

Safety: UL 508
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS: 
     EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
     EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Traffic Control: NEMA TS2 (IEX-402-VDSL2 only)
Rail Traffic: EN 50121-4
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6

MTBF (mean time between failures)

Time: 1,310,000 hrs
Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years