PCIE-1763AH-AE ADVANTECH pci express serial boards

 Features

• 16-ch solid-state relay (SSR) output with longer lifetime and higher operating speed compared to electro-mechanical relays
• Zero-crossing (synchronous) trigger for reduced inrush current and electrical noise
• 16-ch photoMOS relay output with longer lifetime and higher operating speed compared to electro-mechanical relays
• Much less contact problems such as arcs, bounce, and noise
• Suitable for both AC and DC applications with frequent ON/OFF switching
• LEDs for output state indication
• 16-ch isolated digital input (IDI) with both dry and wet contact configurations
• Interrupt capability for all IDI channels
• Programmable duration noise filter for all IDI channels

Introduction

The PCIE-1763AH provides 16 solid-state relay (SSR) outputs and 16 isolated digital input. The SSRs are classified to semiconductor relays which do not have moving contact and
differ from the conventional electro-mechanical relays in many ways. They are superior to electro-mechanical relays in longer lifetime, higher operating speed, less contact problems
such as arcs, bounce, and noise. In addition, the zero-crossing (synchronous) trigger effectively reduces inrush current and electrical noise during SSR turn-on. Therefore, they are
most suitable for applications which need conducting high voltage (> 80 VAC) AC loads and frequent ON/OFF switching.
The PCIE-1763DH provides 16 photoMOS relay outputs and 16 isolated digital input. The photoMOS relays are classified to semiconductor relays which do not have moving contact
and differ from the conventional electro-mechanical relays in many ways. They are superior to electro-mechanical relays in longer lifetime, higher operating speed, less contact
problems such as arcs, bounce, noise, and smaller size. Therefore, they are most suitable for applications which need conducting AC or DC low voltage load (< 60 V) and frequent
ON/OFF switching.
The isolated digital inputs accept both dry and wet contact configurations. All channels have interrupt capability and are equipped with programmable duration noise filter.

Specifications

Solid-State Relay Output 

Channels: 16
Relay type: Solid-state relay SPST (form A)
Load voltage: 400 V max. (AC rms)
Load current: 1.2 ARMS max.
Peak load current: 12 A (1 cycle @ 60 Hz)
On-state voltage drop: 2.5 V max.
Off-state leakage current: 100 μA max.
Critical rate of rise of off-state voltage: 200 V/μs min.
Holding current: 25 mA max.
Zero crossing voltage: 50 V max.
Turn-on time: 100 μs max.
Isolation protection: 5000 VRMS

Isolated Digital Input

Channels: 16
Input voltage: 
 Logic 0: 3 V max. (0 V min.)
 Logic 1: 10 V min. (30 V max.)
Input resistance: 2.7 kΩ
Interrupt capability: All channels
Noise filter: 8 μs ~ 131 ms programmable for all channels
Opto-isolator response: 50 μs typ./100 μs max.
Isolation protection: 2,500 VDC max.

General

Interface: PCI Express x1
I/O Connector type: 1 x DB62 female connector
Dimensions: 168 x 100 mm (6.6" x 3.9")
Power consumption: 
 Typical: 3.3V @350mA, 12V @350mA
 Max: 3.3V@ 370mA, 12V @ 1000mA
Operating temperature: 0 ~ 60°C (32 ~ 140°F)
Storage temperature: -20 ~ 70°C (-4 ~ 158°F)
Storage humidity: 5 ~ 95% RH (non-condensing)
Certifications: CE/FCC