UC-8416-T-CE
RISC-based Ready-to-Run Embedded Computer with IXP435, 8 Serial Ports, 3 LAN, 8 Switch Ports, 4 DIO, CompactFlash, USB, WinCE 6.0, Wide Temperature
Features and Benefits
- Intel XScale IXP435 533 MHz processor
- 256 MB DDR2 SDRAM and 16 MB Flash ROM onboard
- 32 MB NAND Flash for data storage
- 256 KB battery backup SRAM
- 8 RS-232/422/485 serial ports
- 8 Ethernet switch ports
- 4 digital input and 4 digital output channels
- 3 10/100 Mbps Ethernet ports
- 2 USB 2.0 hosts for mass storage devices
- CompactFlash socket for storage expansion
- Ready-to-run Linux platform
- DIN-Rail or wall mounting installation
- Robust, fanless design
- -40 to 75°C wide temperature model available
Introduction
The UC-8416 embedded computer comes with 8 RS-232/422/485 serial ports, 3 Ethernet ports, 8 Ethernet switch ports, 4 digital input channels, 4 digital output channels, a CompactFlash socket, and 2 USB 2.0 hosts. The computer uses the Intel XScale IXP435 533 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 16 MB NOR Flash ROM and 256 MB SDRAM give you enough memory to run your application software directly on the UC-8410, and the 32 MB NAND Flash can be used to provide additional data storage. Moreover, the 256 KB SRAM offers a better data retention mechanism for avoiding data loss. The UC-8416 computer comes with 8 RS-232/422/485 serial ports, digital I/O, and has 3 LAN ports and 8 Ethernet switch ports, making it ideal as a communication platform for industrial applications that require network redundancy. The UC-8416 comes with the Linux 2.6 platform pre-installed to provide an open software operating system for software program development. Software written for a desktop PC can be easily ported to the UC-8416 platform by using a common compiler, without needing to modify the code. This makes the UC-8416 an optimal solution for use with industrial applications, but with minimal cost and effort. In addition to the standard model, the UC-8416 also comes in a -40 to 75°C wide temperature model for harsh industrial environments.
Computer
CPU: Intel XScale IXP435, 533 MHz
OS (pre-installed): Linux
DRAM: 256 MB DDR2 SDRAM onboard (512 MB max.)
SRAM: 256 KB, battery backup
Flash:
16 MB NOR Flash onboard to store OS (supports up to 32 MB)
32 MB NAND Flash onboard to store data
Expansion Bus: PCI/104 onboard
USB: USB 2.0 compliant hosts x 2, type A connector
Storage
Storage Expansion: CompactFlash socket
Ethernet Interface
LAN: 3 auto-sensing 10/100 Mbps ports (RJ45)
Switch Port: 8 10/100 Mbps unmaaged ports (RJ45)
Magnetic Isolation Protection: 1.5 kV built-in
Serial Interface
Serial Standards: 8 RS-232/422/485 ports, software-selectable (8-pin RJ45)
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates; see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 4, source type
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
Logic level 0: Close to GND
Logic level 1: Open
Digital Input Levels for Wet Contacts:
Logic level 0: +3V max.
Logic level 1: +10V to +30V (COM to DI)
Connector Type: 10-pin screw terminal block (4 points, COM, GND)
Isolation: 3 kV optical isolation
Digital Output
Output Channels: 4, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 10-pin screw terminal block (4 points, GND)
Isolation: 3 kV optical isolation
LEDs
System: Power, Ready, Storage, Battery for SRAM
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 8, RxD x 8
Reset Button: Supports “Reset to Factory Default”
Physical Characteristics
Housing: SECC sheet metal (1 mm)
Weight: 1 kg
Dimensions: UC-8410: 200 x 37 x 120 mm (7.87 x 1.46 x 4.72 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature:
Standard Models: -20 to 75°C (-4 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 12 to 48 VDC (3-pin terminal block)
Power Consumption:
15 W
310 mA @ 48 VDC
625 mA @ 24 VDC
1350 mA @ 12 VDC
Standards and Certifications
Safety: UL 60950-1, EN 60950-1, CCC (GB9254, GB17625.1)
EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class B
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures): 156,942 hrs
Warranty
Warranty Period: 5 years
Linux
OS: Linux 3.8.13
File System: JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite: TCP, UDP, IPv4, IPv6, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security: OpenVPN, iptables firewall
Web Server (Apache): Allows you to create and manage web sites; supports PHP and XML
Terminal Server (SSH): Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking: PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
Watchdog: Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software:
Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
GNU C/C++ cross-compiler
GNU C library
GDB source-level debugging server
Software Protection: Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS: Windows Embedded CE 6.0
File System: FAT
Internet Protocol Suite: TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS): Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking: Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
Watchdog: Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software:
Moxa WinCE 6.0 SDK
Moxa API Library
C Libraries and Run-times
Component Services (COM and DCOM)
Microsoft® .NET Compact Framework 3.5
XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
SOAP Toolkit Client
Winsock 2.2