VPort 364A-S-SC-T MOXA industrial video servers

VPort 364A-S-SC-T MOXA












VPort 364A-S-SC-T

4-channel H.264/MJPEG Industrial Video Encoder, 1 single mode 100BaseFX Ethernet port, -40 to 75°C

Prezzo per pezzo

€ 978,90

(IVA esclusa)

€ 1.194,26 (IVA inclusa)

Articoli Prezzo (IVA esc.)
1+ pz.€ 978,90
3+ pz. € 959,322
5+ pz. € 939,744

Prezzo di 1 pz. iva (22%) inclusa: € 1.194,26

Disponibilità: Non Disponibile

Brand: MOXA

SKU: 92668

Model: VPort 364A-S-SC-T

Bisogno di aiuto?


Prodotti Correlati

MOXA

DR-4524

Prezzo:  € 52,92   

MOXA

MDR-40-24

Prezzo:  € 77,52   

MOXA

MDR-60-24

Prezzo:  € 105,70   

MOXA

RK-4U

Prezzo:  € 169,91   

MOXA

WK-46

Prezzo:  € 6,26   

Features and Benefits

  • Dual simultaneous H.264 and MJPEG video streams
  • Video latency under 200 ms
  • Moxa DynaStream™ function supported for network efficiency
  • ONVIF supported for standardization and interoperability
  • 802.1X and SSL/SSH for advanced network security
  • Industrial design with -40 to 75°C operating temperature
  • VPort SDK PLUS provided free

Introduction

The VPort 364A is a 4-channel industrial video encoder that supports the H.264 video compression algorithm, which uses less bandwidth than other video compression standards; the VPort 364A provides the best video quality available on the market today. In addition, the VPort 364A supports simultaneous dual video streams with different Introduction formats: H.264 and MJPEG. The two video streams can be used for different purposes, such as viewing, recording, or analysis. In addition, the rugged industrial design with -40 to 75°C operating temperature, built-in fiber Ethernet ports, IP30 form factor protection, and industrial certifications, make the VPort 364A highly suitable for use in harsh environments.

Video

Video Compression: H.264 (MPEG4 part 10, AVC) or MJPEG
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohm)
Video Streams: Dual streams (one for H.264, the other for MJPEG)
NTSC/PAL: Manual
Video resolution and FPS (frame per second):
     CIF:
          NTSC:
               Size: 352x240
               Max. FPS: 30

          PAL:
               Size: 352x288
               Max. FPS: 25

     QCIF:
          NTSC:
               Size: 176x112
               Max. FPS: 30

          PAL:
               Size: 176x144
               Max. FPS: 25

      2CIF:
           NTSC:
                Size: 352x240
                Max. FPS: 30

           PAL:
                Size: 704x288
                Max. FPS: 25

     4CIF:
          NTSC:
               Size: 704x480
               Max. FPS: 30

          PAL:
               Size: 704x576
               Max. FPS: 25
     Full D1:
          NTSC:
               Size: 720x480
               Max. FPS: 30

          PAL:
               Size: 720x576
               Max. FPS: 25
Video Viewing: 
     DynaStream™ supported for changing the video frame rate automatically
     Adjustable image size and quality
     Timestamp and text overlay

Audio

Audio Inputs: 1, Line-in or MIC-in with RCA connector
Audio Outputs: 1, Line-out with RCA connector
Audio Format: Mono, PCM

Network

Protocols: TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/ TCP, 802.1X (Pending), SSL/SSH (Pending)
Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (single/multi-mode, SC connector)

Serial Port

PTZ Ports: 1, RS-232/422/485 port (5-pin terminal block connector), max. speed of 115.2 Kbps
Console Port: 1, RS-232 RJ45 port

GPIO

Digital Inputs: 4, max. 8 mA
Low: +13 V to +30 V; High: -30 V to +3 V
Relay Outputs: 2, max. 24 VDC @ 1 A

LED Indicators

STAT: System status
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
V1, V2, V3, V4: Video input signal activity for channels 1 to 4

Power Requirements

Input Voltage: 2 12 VDC or 24 VDC/VAC inputs for redundancy, terminal block connector
Power Consumption: Max. 7.5 W

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight: 1110 g
Installation: DIN rail mounting or panel mounting (with optional mounting kit)

Alarms

Video Motion Detection: Includes sensitivity tuning
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions
Custom Alarms: HTTP event servers and CGI events for setting customized alarm actions
Pre-alarm Buffer: 24 MB per channel for JPEG snapshot images

PAN/TILT/ZOOM

PTZ Camera Control: Via RS-232/422/485 PTZ port
PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 24 custom commands
PTZ Function Updates: Driver upload supported
Supported Device Protocols: Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera
Transparent PTZ Control: Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder

Security

Password: User level password protection
Filtering: By IP address
Authentication: 802.1X (Pending)
Encrytpion: SSL/SSH (Pending)

Environmental Limits

Operating Temperature: 
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
     Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
     EN 61000-4-2 (ESD) Level 2,
     EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 3,
     EN 61000-4-5 (Surge) Level 3,
     EN 61000-4-6 (CS) Level 3,
     EN 61000-4-8,
     EN 61000-4-11

MTBF (mean time between failures)

Time: 465,000 hrs
Database: Telcordia (Bellcore), GB 25°C

Warranty

Warranty Period: 5 years

Minimum Viewing System Requirements

CPU: Pentium 4, 2.4 GHz or above
Memory: 512 MB memory or above
OS: Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser: Internet Explorer 9.x or above
Multimedia: DirectX 9.0c or above

Software Development Kit

VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
Standard: ONVIF













Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Advantech
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Contattaci via email: clicca qui

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade