LRP-422CST Planet Gigabit PoE Managed Switches

LRP-422CST, Industrial 4-port Coax + 2-port 10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over Coaxial Managed Switch

Brand: PLANET

Line: 1G

SKU: 115343

Url: https://www.digitx.it/codice/c-lrp_422cst/brand-planet/id_prod-115343/

 PLANET Long Reach PoE Solution enables all enterprises and network service providers to set up an IP infrastructure in a remote location where 802.3af/at PoE compliant powered devices can receive both data and power via PLANET switches, and PLANET LRP extenders and injectors over a long distance but not limited to the normal 100 meters.

Intelligent Long Reach PoE Switch on Coaxial-based Network

PLANET LRP-422CST, a brand-new Multi-channel Long Reach PoE Switch, features an extended Ethernet and PoE networking of up to 1 kilometer over the existing coaxial cables going to multiple PoE compliant devices. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 4 BNC ports with Long Reach PoE Injector function, 2 Gigabit copper ports and 2 extra 100/1000BASE-X SFP fiber slots. Each of the BNC ports provides 36 watts of power with a total power budget of up to 150 watts. As an advanced PoE switch, the LRP-422CST features intelligent PoE functions to improve the availability of critical applications. It provides a quick, safe and cost-effective PoE network solution to upgrading the existing coaxial cable infrastructure from the analog system to the HD IP surveillance system.

Hardware Specifications

Ethernet Interfaces ■ Copper
• 2 x 10/100/1000BASE-T RJ45
• Auto-negotiation/Auto-MDI/MDI-X
 
■ Fiber Optic
• 2 x 100/1000BASE-X SFP slot
• Supports 100/1000Mbps dual mode and DDM
 
■ Jumbo Frame
• 10Kbytes with GE1 to GE4
Long Reach PoE Interfaces ■ Connectivity
• 4 x BNC female connectors
• Long Reach PoE over coaxial PSE (Power Source Equipment)
　- BNC center pole: DC+/Hi
　- BNC shield: DC -/Lo
 
■ Power Output
• Per port 48~56V DC, 36 watts (max.)
 
■ Total Power Budget
• 150 watts (max.)
 
■ Cabling
• Coaxial cable: 75 ohm
• RG-6/U cable (Recommended)
 
■ Maximum Distance
• Max. 200m with PoE+ output (1,640ft.)
• Max. 400m with PoE output (2,624ft.)
• Max. 1200m without PoE output (3,937ft.)
 
■ Long Reach Ethernet Standard
• IEEE 1901
 
■ Modulation Type
• Wavelet-OFDM
 
■ Security
• 128-bit AES encryption
 
■ Frequency Band
• 2 ~ 28MHz
 
■ Multiple Nodes
• Up to 4 LRP extenders within 1km RG-6/U coaxial cable*
 
* The actual extender nodes vary on the quality of the copper wire and environmental factors.
 
■ LRP Compatibility
• LRP-101CE: 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach PoE Extender
Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 8.8Gbps/non-blocking
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
EST Protection 6KV DC
ESD Protection 6KV DC
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount kit
Connector Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC
LED System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Red)
Per LRP Port:
LNK/ACT (Green)
PoE In-use (Orange)
Per Gigabit Port:
LNK/ACT (Green)
1000(Orange)
Dimensions (W x D x H) 107 x 72 x 152 mm
Weight 1,150g
Power Requirements 48 to 56V DC
Power Consumption 9.5 watts/32.42 BTU (System on)
165 watts/563.0 BTU (Full loading)