EKI-5729FI-AE
8 Ports 10/100/1000Base-T(X) + 2 ports SFP Industrial Unmanaged Ethernet Swicth, -40 ~ 75 °C Operating Temperature
Features
- Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- -40 ~ 75°C operating temperature range (EKI-5729FI only)
- 12 ~ 48 VDC (8.4 to 52.8 VDC) wide-range power input
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12 ~ 48 VDC power input and P-Fail relay
- Loop detection
Introduction
The EKI-5729F/FI are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA
software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers
or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less
immediately necessary data over the remaining ports. EKI-5729F/FI switches use the highest quality components, to enable the range to operate in temperatures of between -40 and
75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Specifications
Communications
Standard: IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN: 10/100/1000Base-T(X), Optional 100Base-FX, 1000Base-SX/LX/LHX/XD/ZX/EZX
Transmission Distance:
Ethernet: UP to 100 m (4-wire Cat.5e, Cat.6 RJ-45
cable suggested for Gigabit port)
SFP: UP to 110 km (depends on SFP)
Transmission Speed Ethernet:
10/100/1000 Mbps Auto-Negotiation
Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation
Gigabit Fiber: UP to 1000 Mbps
Interface
Connectors:
8 x RJ45
2 x SFP ports
6-pin removable screw terminal (power & relay)
LED Indicators:
P1, P2, P-Fail, Loop detection
10/100/1000T(X): Link/Activity, Speed
SFP: Link/Activity
Switch Properties
MAC Table Size: 8K
Packet Buffer Size: 4.1M bit
Switching Capacity: 20 Gbps
Jumbo Frame: 9216 bytes
Power
Power Consumption: Max. 6.8 W
Power Input: 12~48 VDC (8.4~52.8 VDC), redundant dual inputs
Fault Output: 1 Relay Output
Mechanism
Dimensions (W x H x D): 43 x 120 x 84 mm
Enclosure: IP30, metal shell with solid mounting kits
Mounting: DIN-Rail, Wall
Protection
Reverse Polarity: Present
Overload Current: Present
Environment
Operating Temperature: -40~75°C (-40~167°F)
Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
Operating Humidity: 10 ~ 95% (non-condensing)
Storage Humidity: 10 ~ 95% (non-condensing)
MTBF: 3,858,286 hours:
Certification
Safety: IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX
EMI: FCC Part 15 Subpart B Class A, EN 55011/55022 Class A
EMS:
EN 61000-4-2 (Level 3)
EN 61000-4-3 (Level 3)
EN 61000-4-4 (Level 3)
EN 61000-4-5 (Level 3)
EN 61000-4-6 (Level 3)
EN 61000-4-8 (Level 3)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6