NPort 5610-16 MOXA External Device Servers

Features and Benefits

• 8 or 16 serial ports supporting RS-232/422/485
• Standard 19-inch rackmount size
• 10/100M auto-sensing Ethernet
• Built-in 15 kV ESD protection for all serial signals
• Easy IP address configuration with LCD panel (excluding wide temperature models)
• Configure via Telnet/Web/Windows utility
• Socket modes: TCP server/TCP client/UDP/Real COM
• SNMP MIB-II for network management

Introduction

With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network. Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network. NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks. Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals. The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices. When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Ethernet Interface

Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 kV built-in

Optical Fiber Interface (for -M-SC and -S-SC)

Table:
     100BaseFX:
          Multi-Mode:
               Wavelength: 1300 nm
               Max. TX: -14 dBm
               Min. TX: -20 dBm
               RX Sensitivity: -32 dBm
               Link Budget: 12 dB
              
               Typical Distance:
                    5 km
                    4 km

               Saturation: -6 dBm

          Single-Mode:
               Wavelength: 1310 nm
               Max. TX: 0 dBm
               Min. TX: -5 dBm
               RX Sensitivity: -34 dBm
               Link Budget: 29 dB
               Typical Distance: 40 km
               Saturation: -3 dBm

Serial Interface

Number of Ports: 8 or 16
Serial Standards:
     NPort 5610: RS-232
     NPort 5630: RS-422/485
Connector: RJ45 (8 pins)
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485: 1 kΩ, 150 kΩ (NPort 5650-8/16)

Serial Communication Parameters

Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 kbps

Serial Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND

Software

Network Protocols: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options: Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x

Mini Screen with Push Buttons (for standard temp. models)

LCD Panel: Liquid Crystal Display on the case
Push Buttons: Four push buttons for convenient on-site configuration

Physical Characteristics

Housing: Metal
Weight:
     NPort 5610-8: 3340 g
     NPort 5610-8-48V: 3160 g
     NPort 5630-8, 5650-8-S-SC, 5650-8-M-SC: 3380 g
     NPort 5610-16: 3420 g
     NPort 5610-16-48V: 3260 g
     NPort 5630-16: 3400 g
Dimensions:
     Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
     With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 55°C (32 to 131°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature:
     Standard Models: -40 to 75°C (-40 to 167°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Power Requirements

Input Voltage:
     NPort 5610/5630/5650: 100 to 240 VAC, 47 to 63 hz
     NPort 5610-48V: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption:
     NPort 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC
     NPort 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC
     NPort 5610-8/16-48V: 135 mA @ 48 VDC

Standards and Certifications

EMI: EN55022 Class A, FCC part 15 Subpart B Class A
EMS:
     EN 61000-4-2 ESD: contact 4 kV; air 8 kV
     EN 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz)
     EN 61000-4-4 EFT: Power 4 kV; Signal 2 kV
     EN 61000-4-5 Surge: AC 1 kV (AC models); DC 2 kV (DC/HV models); Signal 1 kV
     EN 61000-4-6 CS: 3 V
     EN 61000-4-8
     EN 61000-4-11: A
Safety: UL 60950-1, EN 60950-1
EMC: 55022/24
Medical: EN 60601-1-2 Class B, EN 55011

Reliability

Automatic Reboot Trigger: Built-in WDT (watchdog timer)
MTBF (mean time between failures):
     NPort 5610-8: 97,294 hrs
     NPort 5610-16: 94,928 hrs
     NPort 5610-8-48V: 96,758
     NPort 5610-16-48V: 94,417 hrs
     NPort 5630-8: 118,405 hrs
     NPort 5630-16: 91,483 hrs

Warranty

Warranty Period: 5 years