NPort S9650I-8F-2HV-SSC-T MOXA External Device Servers

Features and Benefits

• Supports up to 4 managed Ethernet switch ports (fiber available with some optional network modules)
• 8/16-port RS-232/422/485 serial interface
• Supports DNP3 and Modbus protocols
• Ethernet redundancy with Turbo Ring/Chain and RSTP/STP supported
• Real COM/TTY drivers for Windows and Linux
• IEC 61850-3, IEEE 1613 (power substations) compliant
• IEEE 1588v2 and IRIG-B time synchronization functions
• Supports IEC 61850 MMS protocol
• Security features based on IEC 62443/NERC CIP
• -40 to 85°C wide operating temperature

Introduction

The NPort S9650I Series 8/16-port RS-232/422/485 device servers, which come with a built-in full-function managed Ethernet switch, are designed specifically for the harsh environmental conditions found in electrical substations. With both fiber and wired Ethernet ports supported, the combination of a device server and Ethernet switch gives users the ability to easily install, manage, and maintain the NPort S9650I itself, as well as attached serial devices.

Specifications

Input/Output Interface
Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
 
Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector): 2
100BaseFX Ports (single-mode SC connector): 2

Magnetic Isolation Protection: 1.5 kV (built-in)
Standards:
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1X for authentication
IEEE 802.3 for 10BaseT
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3u for 100BaseT(X) and 100BaseFX
 
Switch Properties
IGMP Groups: 256
Max. No. of VLANs: 64
Priority Queues: 4
VLAN ID Range: VID 1 to 4094
 
Ethernet Software Features
Configuration Options: Command Line Interface (CLI) through Serial/Telnet/SSH, Web Console (HTTP/HTTPS), Windows Utility
Management: DHCP Client, DHCP Option 82, HTTP, IEC 61850 MMS, IPv4, LLDP, Port Mirror, RARP, RMON, SMTP, SNMPv1/v2c/v3, Syslog, Telnet, TFTP, Web Console
Filter: GMRP, GVRP, IGMP v1/v2
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers: Kernel version: 2.4.x, 2.6.x, 3.x, 4.x
Fixed TTY Drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API: Android 3.1.x and later
Industrial Protocols: Modbus TCP Server (Slave), DNP3 TCP Outstation (Slave)
Time Management: NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based), IRIG-B
MIB: Bridge MIB, Device Settings MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, Q-BRIDGE MIB, RFC1213, RFC1317, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
Redundancy Protocols: RSTP, Turbo Chain, Turbo Ring v1, Turbo Ring v2
Security: HTTPS/SSL, Local Account Accessibility, TACACS+, RADIUS, SSH
 
Serial Interface
Connector: Multimode fiber SC connector
No. of Ports: 8
Serial Standards: RS-232, RS-422, RS-485
Operation Modes: Real COM mode, RFC2217 mode, TCP Client mode, TCP Server mode, UDP mode, Modbus mode, DNP3 mode, DNP3 Raw Socket mode, Disabled
Baudrate: 50 bps to 921.6 kbps (supports non-standard baudrates)
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: None, RTS/CTS, XON/XOFF
Isolation: 2 kV
Surge: 4 kV
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485: 120 ohms
Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (19200, n, 8, 1)
 
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
 
DIP Switch Configuration
Ethernet Interface: Turbo Ring, Master, Coupler, Reserved
 
Modbus TCP
Max. No. of Client Connections: 32
Max. No. of Server Connections: 16
 
DNP3 (Transparent)
Max. No. of Master Connections: 16
Max. No. of Outstation Connections: 32
 
Reliability
Automatic Reboot Trigger: Built-in WDT
Alert Tools: Built-in buzzer and RTC (real-time clock)
 
Power Parameters
No. of Power Inputs: 2
Reverse Polarity Protection: Supported
Input Current: 0.65 A @ 100 VAC, 0.47A @ 100 VDC
Input Voltage: 110/220 VAC/VDC (100 to 240 VAC, 100 to 250 VDC)
 
Physical Characteristics
Housing: Metal
Installation: 19-inch rack mounting
Dimensions: 457 x 32 x 330 mm (18 x 1.25 x 12.99 in)
Weight: Product only: 5.15 kg (11.35 lb)
 
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
 
Standards and Certifications
EMC: EN 61000-6-2/-6-4
EMI: CISPR 32, FCC Part 15B Class A
EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
 
Environmental Testing:
IEC 60068-2-2
IEC 60068-2-14
 
Power Substation: IEC 61850-3, IEEE 1613
Safety: EN 61010-2-201, UL 61010-2-201
Shock: IEC 60068-2-27
Vibration: IEC 60068-2-6, IEC 60068-2-64
 
Declaration
Green Product: RoHS, CRoHS, WEEE
 
MTBF
Time: 304,587 hrs
Standards: Telcordia SR332
 
Warranty
Warranty Period: 5 years