TCF-142-S-ST-T MOXA Fiber Converters

Features and Benefits

• “Ring” and “Point- to-Point” transmission
• Extends RS-232/422/485 transmission up to: 40 km with single-mode—TCF-142-S, 5 km with multi-mode—TCF-142-M
• Decreases signal interference
• Protects against electrical interference and chemical corrosion
• Supports baudrates up to 921.6 kbps
• Wide temperature models available (-40 to 75°C)

Introduction

The TCF-142 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time. The TCF-142 converters can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss. The TCF-142 converters can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km. ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.

Optical Fiber Side

Fiber Connector: SC or ST
Cable Requirements:
     Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
     Multi-mode: 50/125, 62.5/125, or 100/140 μm
Transmission Distance:
     Single-mode: 40 km
     Multi-mode: 5 km
Wavelength: 
     Single-mode: 1310 nm
     Multi-mode: 850 nm
Tx Output:
     Single-mode: > -5 dBm
     Multi-mode: > -5 dBm

Rx Sensitivity: 

Single-mode: -25 dBm
Multi-mode: -20 dBm
Point-to-Point Transmission: Half-duplex or full-duplex
Ring Transmission: Half-duplex

RS-232/422/485 Side

Connector: Terminal Block
RS-232 Signals: Tx, Rx, GND
RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w Signals:TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals: Data+, Data-, GND
Baudrate: 50 bps to 921.6 Kbps
ESD Protection: 15 KV for all signals

Physical Characteristics

Housing: Aluminum (1 mm)
Dimensions:
     Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
     With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)
Weight: 320 g

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Power Requirements

Input Voltage: 12 to 48 VDC
Power Consumption: 140 mA @ 12 V
Power Line Protection:
     2 KV Burst (EFT), EN61000-4-4
     2 KV Surge, EN61000-4-5
Voltage Reversal Protection: Protects against V+/V- reversal
Over Current Protection: 1.1 A (protects against two signals shorted together)

Standards and Certifications

Safety: UL 60950-1
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class B, EN 55022 Class B
EMS:
     EN 61000-4-2 (ESD) Level 3,
     EN 61000-4-3 (RS) Level 2,
     EN 61000-4-4 (EFT) Level 2,
     EN 61000-4-5 (Surge) Level 2,
     EN 61000-4-6 (CS) Level 2,
     EN 61000-4-8 (SFMF) Level 1
Green Product     RoHS, CRoHS, WEEE

MTBF (mean time between failures)

Time: 780,480 hrs
Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years