LRP-104CET Planet POE Injectors Splitter Extender

 PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 802.3af/at PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.

Perfect 1-to-4 PoE over Coaxial/UTP Extender in Harsh Environment

The LRP-104CET, a PLANET Long Reach PoE solution, is an industrial-grade Single-port Long Reach PoE to 4-port 802.3af/at PoE Extender delivered in an IP30 rugged strong case. It features long-range data and power transmission over any existing coaxial, UTP, twisted-pair cable or telephone wires for distance up to 1,000m and converts power to standard 802.3af/at PoE over another 100-meter Ethernet cable connected to four remote PoE PDs at the same time. The LRP-104CET provides one to multi applications for configure-free operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. It makes the installation of remote PoE powered devices easier and more efficiently.

Specifications

Hardware Specifications

Ethernet Interface:
■ Copper Ports
• Four 10/100BASE-TX RJ45 auto-MDI/MDI-X
■ PoE Injector Ports
• Four ports with 802.3at/af PoE injector function with Port-1 to Port-4
■ Functionality
• Four DIP switches to control PoE output on or off with Port-1 to Port-4
■ PoE Standards Compliance
• IEEE 802.3at Power over Ethernet Plus/PSE
■ PoE Type
• End-span
■ PoE Power output
• 52V DC, PoE output depends on LRP Injector or LRP Switch
• 52V DC, 25 watts per port (external DC input)
■ Cabling
• Ethernet: 10BASE-T: 2-pair UTP Cat.3, 4 and 5
• Ethernet: 100BASE-TX: 2-pair UTP Cat.5, 5e and 6
■ Maximum Distance
• 100m
■ Maximum Frame size
• 1522 bytes
 
Long Reach PoE Interface:
■ Connectivity
• One BNC female Long Reach PoE over Coaxial PD
• One RJ45 connector Long Reach PoE over UTP PD
 
■ Power Input
• 44~ 56V DC
 
■ Power Pin Assignment
• BNC center pole: DC+
• BNC shield: DC-
• RJ45 Pins 1, 3, 5, 7: VCC+
• RJ45 Pins 2, 4, 6, 8: VCC-
 
■ Cabling
• Coaxial cable: 75 ohm
• RG-6/U cable, less than12Ω/1000 ft.
• RG-59/U cable, less than 30Ω/1000 ft.
• Cat. 3, 4, 5, 5e UTP cable (100 meters, max.)
• EIA/TIA-568 100-ohm STP (100 meters, max.)
 
■ Maximum Distance
• Coaxial
　- Max. 200m with PoE+ output (656ft.)
　- Max. 1000m with PoE output (3,280ft.)
• UTP
　- Max. 500m with PoE+ output (1,640ft.)
 
■ Long Reach Ethernet Stan dard
• IEEE 1901
 
■ Modulation Type
• Wavelet-OFDM
 
■ Security
• 128-bit AES encryption
 
■ Frequency Band
• 2 ~ 28 MHz
 
■ Encryption
• AES 128-bit
 
■ LRP Compatibility
• With power over coaxial input
　- LRP-101CH – 1-Port LRP Injector
　- LRP-822CS – 8-Port LRP over Coax Switch
　- LRP-1622CS – 16-Port LRP over Coax Switch
• With power over UTP input
　- LRP-101UH – 1-Port LRP Injector
 
LED Indicator:
3 x LED for External Power Supply:
DC Power 1 (Green)
DC Power 2 (Green)
Power Fault ( Red )
4 x LED for PoE Usage:
10W/20W/30W/40W (Green)
2 x LED for Long Reach PoE In:
PWR (Green)
LNK (Green)
2 x LED for each RJ45 interface (Port-1 and Port-4)：
10/100Mbps LNK/ACT (Green)
PoE-in-use (Orange)
 
Installation: DIN rail kit and wall-mount kit
Dimensions (W x D x H): 135 x 87.8 x 56 mm
Weight: 644g
Power Requirements: 44~56V DC power over coaxial input
DC 24~48V, redundant power with polarity reverses protection function
Power Consumption/Dissipation: 130 watts/446BTU (Ethernet with PoE Full Loading)
Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
Enclosure: Aluminum case

Standards Conformance

Standards Compliance: IEEE 802.3 Ethernet/10BASE-T
IEEE 802.3u Fast Ethernet/100BASE-TX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3at Power over Ethernet Plus
Regulatory Compliance: FCC Part 15 Class A, CE
Stability Testing: IEC60068-2-32 (free fall)
IEC60068-2-27 (anti-shock)
IEC60068-2-6 (anti-vibration)

Environment

Temperature: Operating: -20~70 degrees C
Storage: -25~75 degrees C
Humidity: Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)