LRP-201ET Planet POE Injectors Splitter Extender

 PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote ultra PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.

Powerful PoE over Coaxial/UTP Extender

The LRP-201ET, a PLANET Long Reach PoE solution, is an Industrial Single-port 10/100/1000T Ultra PoE over Coaxial/UTP Extender featuring long range data and power transmission over any existing coaxial, UTP cable or telephone wire for distance up to 600 meters (1,968ft.) and converts power to IEEE 802.3at/bt PoE over another 100-meter Ethernet cable connected to the remote PoE PD. The LRP-201ET provides multi applications for easy Plug and Play operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. It makes the installation of remote PoE PDs easier and more efficient.

Hardware Specifications

Ethernet Interface:
Copper
10/100/1000BASE-T RJ45
Auto-negotiation/ Auto-MDI/MDI-X
Power over Ethernet Standard
IEEE 802.3at/bt PoE PSE
PoE Output
56V DC, 1.2A max.
PoE Budget
Up to 60 watts
PoE Mode
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Data Rate
100/100/1000Mbps
Cabling
Cat. 5e or above
Maximum Distance
100 meters
Maximum Frame sizes
1522bytes
 
Long Reach PoE Interface*:
Connectivity
1 x RJ45 female connector
Long Reach PoE over UTP PD
1 x BNC female connector
Long Reach PoE over coaxial PD
Power Input
40~54V DC
Power Pin Assignment
Coaxial
- BNC center pole: DC+
- BNC shield: DC-
UTP
- RJ45 Pins 1, 3, 5, 7: VCC+
- RJ45 Pins 2, 4, 6, 8: VCC-
Cabling
Coaxial
- Coaxial cable: 75 ohm
- RG-6/U cable, less than 12Ω/1000 ft.
- RG-59/U cable, less than 30Ω/1000 ft.
UTP
- Cat. 5e/6 UTP cable
- EIA/TIA-568 100-ohm STP
Maximum Distance
Coaxial
- Max. 200m with PoE++ output (656ft.)
- Max. 400m with PoE+ output (1312ft.)
- Max. 600m with PoE output (1,968ft.)
UTP
- Max. 100m with PoE++ output (328ft.)
- Max. 200m with PoE+ output (656ft.)
- Max. 300m with PoE output (984ft.)
- Max. 400m with PoE output (1,312ft.)
Long Reach Ethernet Standard
ITU-T G.hn
Modulation Type
OFDM
Security
128-bit AES encryption
Frequency Band
1 ~ 100 MHz
Multiple nodes
Supports up to 2 LRP extenders within 0.6km
LRP Compatibility
LRP-201HT- 1-Port LRP Injector
 
LED Indicators: - PWR
- SYS
- PAIR
- PoE-in-Use
- LNK/ACT
ESD Protection: 6KV DC
PAIR Button: Press for 3 sec to join LRP-201HT
Reset Button: Press over 10 sec to return to factory default
Enclosure: IP30 slim type metal case
Installation: DIN-rail kit or wall-mount ear
Dimensions (W x D x H): 135 x 87.8 x 32 mm
Weight: 510g
Power Requirements: - BNC Power over Coaxial Input: 40~54V DC, 1.8A max.
- RJ45 Power over Ethernet Input: 40~54V DC, 1.8A max.

Standards Conformance

Standards Compliance: IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet Type 3
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance: FCC Part 15 Class A, CE

Environment

Temperature: Operating: -20~70 degrees C
Storage: -30~75 degrees C
Humidity: Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
 
Note: *Please do not connect any Ethernet device to LRP IN Port of the LRP-201ET; otherwise, it will damage the Ethernet device.