TNS5800D-8P4GT-P24 3onedata EN 50155 Managed Switches

TNS5800D series is layer 3 industrial Ethernet switch designed for rail transit. The product conforms to the requirements of industrial standard EN50155 and EN50121. Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This series has 4 products. They provide 110VDC power supply input and adopt wall mounting, which can meet the needs of different application sites.

The network management system supports various network protocols and industry standards, such as static routing, RIP, VRRP, NAT, STP/RSTP/MSTP, ERPS, 802.1Q VLAN, QoS function, DHCP Server, IGMP Snooping, LLDP, port trunking, port mirroring, etc. It also possesses complete management functions, support port configuration, port statistics, port IP binding, access control, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc.; CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The power input support two independent power supplies, which can ensure the normal operation of the device when one power supply fails. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This device has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It is designed for rail transit industrial and can be widely used in systems such as train control, on-board PIS, CCTV.

 

 

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

ITU-T G.8032 for ERPS

SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Port Statistics, Log Information, Static ARP, PoE Management

Classification of User Permissions, NAT, 802.1X Authentication, DHCP Snooping, Radius Server Authentication, Port Alarm, Power Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, Loop Detection, Link Flapping Protection, Aggregation Protection

802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation

Static Multicast, Multicast Routing, IGMP-Snooping, PIM-SM, PIM-DM

Ring, STP/RSTP/MSTP, ERPS

Ping, Traceroute, Port Loopback

VRRP, RIP, OSPF

NTP

100M PoE M12:10/100base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative

Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning; it supports two groups of Bypass

RELAY interface: M12(Female), 4-Pin D-Coded, support 1 relay alarm output, with current load capacity of 1A@30VDC or 0.3A@125VAC

Console port: CLI command line management port (RS-232), M12(Female), 4-Pin D-Coded

Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator

Transmission mode: store and forward

MAC address: 16K

Packet buffer size: 12Mbit

Backplane bandwidth: 128G

Switch time delay: <10μs

24VDC

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%～95% (no condensation)

Housing: IP67 protection, metal

Installation: wall mounting

Dimension (W x H x D): 178mm × 104mm × 92mm (12-Port device)

260mm × 160mm × 70mm (20-Port device)

EN 50121-3-2: 2016 standard, Table 5.3 (Electrostatic Discharge), Class A

Air discharge:± 8kV

Contact discharge: ±6kV

 

EN 50121-3-2: 2016 standard, Table 3.3 (Surge), Class A

Power supply: common mode±2kV, differential mode±1kV

 

EN 50121-3-2: 2016 standard, Table 3.2 (Electrical Fast Transient Pulses), Class A

Power supply: ±2kV

Signal: ±2kV

 

EN 50121-3-2: 2016 standard, Table 5.1, 5.2 (Radio Frequency Electromagnetic), Class A

80MHz~800MHz，20V/m

800MHz~1GHz，20V/m

1.4GHz~2.0GHz，10V/m

2.0GHz~2.7GHz，5V/m

5.1GHz~6GHz，3V/m

 

EN 50121-3-2: 2016 standard, Table 3.1, 4.1 (Conducted Disturbance Induced by RF Fields), Class A

Power supply: 0.15MHz~80MHz, 10V

Signal: 0.15MHz~80MHz, 10V

 

EN 50121-3-2: 2016 standard, table 3.1 (Power Supply Conducted Disturbance)

150kHz~500kHz, 79dBμV quasi-peak value

500kHz~30MHz, 73dBμV quasi-peak value

 

EN 50121-3-2: 2016 standard, table 3.1 (Radiation Disturbance)

30MHz~230MHz, ＜40dBμV/m quasi-peak value

230MHz~1GHz, ＜47dBμV/m quasi-peak value

 

Shock: IEC 61373

Free fall: IEC 60068-2-32

Vibration: IEC 61373

CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373

5 years