ES2010G-2GS, Layer 2 Unmanaged Ethernet Switch, 8 ports 10/100/1000Base-TX (RJ45)+2 ports Gigabit SFP(SFP slot), dual power supply 12~48VDC
ES2010G-2GS
Layer 2 Unmanaged Ethernet Switch, 8 ports 10/100/1000Base-TX (RJ45)+2 ports Gigabit SFP(SFP slot), dual power supply 12~48VDC
SPEDIZIONE GRATUITA
Bisogno di aiuto?
Introduction
ES2010G series are 10-port full Gigabit layer 2 unmanaged Ethernet switches. This series
include two types of products and provide Gigabit fiber port and Gigabit SFP slot. It adopts
DIN-Rail mounting to meet the requirements of different application scenes.
Power supply input is two independent power supply circuits, which can ensure the device
normal operation when one of the power supplies breaks down. DIP switch supports
one-click configuration of flow control, fiber port aggregation and copper port isolation.
Hardware adopts fanless, low power consumption, wide temperature and voltage design
and has passed rigorous industrial standard tests, which can suit for the industrial scene
environment with harsh requirements for EMC. It can be widely used in smart grid, rail
transit, smart city, safety city, new energy, aerospace, intelligent manufacturing, military
project and other industrial fields.
Features
- DIN-Rail Mounting
- 10-port Full Gigabit Layer 2 Unmanaged Ethernet Switch
- Support 2 Gigabit fiber ports, 8 Gigabit copper ports
- Input voltage: 12~48VDC, dual power supply, reverse polarity protection
- Support 0~55℃ wide operating temperature range
Specification
Standard & Protocol
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow Control
Interface
Copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control,
Full/half Duplex Mode, MDI/MDI-X Autotunning
Fiber port: 1000Base-FX, SC/ST/FC optional
SFP slot: 1000Base-SFP
LED Indicator
Power Supply Indicator, Port Indicator
Switch Property
Transmission mode: store and forward
MAC address: 8K
Packet buffer size: 1Mbit
Backplane bandwidth: 20G
Switch time delay: < 10μs
Power Requirement
12~48VDC, 4-pin 7.62mm pitch terminal blocks
Dual power supply redundancy, reverse polarity protection
Power Consumption
No-load (@24VDC): 2.4W
Full-load (@24VDC): 8.5W
Environmental Limit
Operating temperature: 0~55℃
Storage temperature: -10~65℃
Relative humidity: 5%～95% (no condensation)
Physical Characteristic
Housing: IP30 protection, metal
Installation: DIN-Rail mounting
Dimension (W x H x D): 50mm×115mm×80mm
Weight: ≤450g
Industrial Standard
IEC 61000-4-2 (ESD) ，Level 4 (Suit for ES2010G-2GS)
Air discharge: ±15kV
Contact discharge: ±8kV
IEC 61000-4-2 (ESD), Level 1 (Suit for ES2010G-2GF)
Air discharge: ±2kV
Contact discharge: ±2kV
IEC 61000-4-5 (Surge), Level 2 (Suit for ES2010G-2GF)
Power supply: common mode ±1kV, differential mode ±0.5kV
Ethernet port: ±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
3 years