5 ports Industrial 5GHz Wireless Access Point IAP-2400AX

PLANET IAP-2400AX Industrial 5GHz 802.11ax 2400Mbps Wireless Access Point with 5 10/100/1000T LAN Ports is equipped with a rugged IP30 metal case for stable operation in heavy industrial environments. The IAP-2400AX supporting MU-MIMO, OFDMA, Seamless Roaming, Beamforming and BSS Coloring provides a maximum wireless speed of 2400Mbps in the 5GHz band. The maximum number of client users is up to 150, ensuring more secure and robust connectivity with the adoption of Wi-Fi 6 technology.

As the IAP-2400AX is able to operate under wide temperature range from -40 to 75 degrees C, it can be placed in almost any difficult environment. The IAP-2400AX also allows either DIN rail or wall mounting for efficient use of cabinet space.

 

The IAP-2400AX delivers the 5GHz band and more bandwidth to avoid signal interference and ensure the best Wi-Fi performance. It allows you to check e-mails and surf the Internet and simultaneously watch full high-definition (HD) video or any other multimedia application via one 5GHz band. Besides, many client users can be connected to Wi-Fi at the same time. The maximum number of client users is up to 150. Moreover, the Gigabit Ethernet port of the IAP-2400AX offers ultra-fast wired connections that utilize the maximum wireless bandwidth; therefore, users will experience a fast wireless speed of over 900Mbps. With the outstanding stability of high-speed wireless transmission, the IAP-2400AX can provide users with excellent experience in multimedia streaming with your mobile devices anywhere, anytime.

 

Moving between a traditional Wi-Fi AP or router and range extender, your Wi-Fi signal can experience lag or a dropped connection. With Seamless Roaming and intuitive technology, moving to different area is never an issue now that your devices are switched to the strongest Wi-Fi signal automatically. 

The IAP-2400AX features advanced 4T4R MU-MIMO technology which reduces the effect of dead spot, so that it can get better coverage of the existing wireless network. Furthermore, the repeater mode supported by the IAP-2400AX helps to minimize the effort of installation, thus reducing cabling cost.

 

4 x 10/100/1000BASE-T RJ45 LAN ports, auto-negotiation, auto MDI/MDI-X (Port 1 to Port 4)

1 x 10/100/1000BASE-T RJ45 WAN/LAN port, auto-negotiation, auto MDI/MDI-X (Port 5)

4 x 5GHz band RP-SMA connectors with antennas

1 USB 3.0 port for system configuration backup/upload and firmware upgrade

1 x reset button for system factory default and reboot

 

Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X

Features Store-and-Forward mode with wire-speed filtering and forwarding rates

IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

10K jumbo frame

Automatic address learning and address aging

 

Interfaces: 

5 10/100/1000BASE-T RJ45 Ethernet ports including

4 LAN ports (Ports 1 to 4)

1 WAN/LAN port (Port 5)

 

Wireless Connector: Built-in four RP-SMA female connectors

 

USB Port: 1 USB 3.0 port

 

DI & DO Interfaces: 

2 Digital Input (DI):

Level 0: -24V~2.1V (±0.1V)

Level 1: 2.1V~24V (±0.1V)

Input Load to 24V DC, 10mA max.

 

2 Digital Output (DO):

Open collector to 24V DC, 100mA max.

 

Connector: 

Removable 6-pin terminal block for power input

Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

 

Reset Button: < 5 sec: System reboot

 

> 10 sec: Factory default

 

Enclosure: IP30 metal case

 

Installation: DIN-rail, desktop, wall-mounting

 

Dimensions (W x D x H): 50 x 135 x 135 mm

 

Weight: 787g

 

Power Requirements – DC: 

9~54V DC, 1.8A

Power Consumption: Max. 5.9 watts/ 20BTU (No Loading at DC 54V)

Max.10.8 watts/ 36BTU (Full loading at DC 54V)

 

LED Indicators: 

System:

P1 (Green)

P2 (Green)

Alarm (Red)

I/O (Red)

Ethernet Interfaces (Ports 1-4 LAN Port and Port 5 WAN/LAN Port):

1000 LNK/ACT (Green)

10/100 LNK/ACT (Amber)

Wi-Fi:

5GHz(Green)