IGT-2205AT
IP30 Industrial 2 port 10/100/1000T to 2 port 100/1000/2500X SFP Media Converter(-40 to 75 degree C, dual 12~48V DC/24V AC, Fiber ports Switch/Redundant mode DIP switch)
Bisogno di aiuto?
Flexible, Reliable and Industrial-grade Network Distance Extension Solution
PLANET IGT-2205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with two 10/100/1000BASE-T RJ45 copper port and two 100/1000/2500BASE-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-2205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
Applications
Hardened Environment Application
PLANET IGT-2205AT Industrial Gigabit Media Converter offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGT-2205AT is also compatible with 100/1000/2500Mbps SFP transceivers to provide a strong, stable and long-distance connection and flexible industrial networking deployment.
Redundancy Application
The IGT-2205AT industrial Gigabit Media Converter provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.
Features and Benefits
Physical Port
- 2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
- 2-port SFP, supporting 100/1000/2500BASE-X transceiver type auto detection
Fiber Port Redundancy
- Automatically detects link status and redundancy on dual ports with the same connector type.
- Only primary port is active at a time, while the backup port is blocked.
- When primary port link failure occurs, the traffic will swap to back up port automatically.
- Once the primary port status is back to link up, the traffic will swap from backup port to primary port.
Specifications
Hardware Specifications
Copper Interface: 2 x 10/100/1000BASE-T RJ45
Fiber Optic Interfaces:
2 x 100/1G/2.5GBASE-X SFP interfaces (Port-1 and Port-2)
Supports auto detection
Connector:
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
LED:
System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Alarm
Per Copper Port (Port-3~Port-4):
Green: 1G LNK/ACT
Amber:100 LNK/ACT
SFP interface (Port-1~ Port-2)
Green + Amber: 2.5G LNK/ACT
Green: 1G LNK/ACT
Amber:100 LNK/ACT
Alarm:
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Power Requirements:
DC 12~48V or AC 24V
Redundant power with reverse polarity protection
Power Consumption / Dissipation: 4.92 watts/16.9BTU
Dimensions (W x D x H): 32 x 87 x 135mm
Weight: 419g
Enclosure: IP30 type metal case
Installation: DIN-rail kit and wall-mount ear
ESD Protection: 6KV DC