IGTP-805AT
1000BASE-SX /LX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (mini-GBIC, SFP)
Bisogno di aiuto?
PLANET IGTP-80xT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over Ethernet Plus (PoE+) injector to deliver both up to 30 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGTP-80xT supports 12~48V DC power input or 24V AC power input for power redundancy and operational flexibility.
Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGTP-80xT can be placed in almost any difficult environment.
Specifications
Ethernet Interface
Copper: 10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X with PoE injector function
1000BASE-X Fiber-optic Connector Type: SFP (LC)
Fiber Cable: Varying on SFP Module
Fiber Cable Distance: Varying on SFP Module
Fiber Optical Frequency: Varying on SFP Module
Launch Power: Varying on SFP Module
Receive Sensitivity: Varying on SFP Module
Maximum Input Power: Varying on SFP Module
Power Over Ethernet
PoE Standard: IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PoE Power Output: 52V DC: 15.4 watts
52V DC: 30 watts
PoE Power Supply Type: End-span
Power Pin Assignment: 1/2(+), 3/6(-)
PoE Power Budget: 30 watts
Hardware Specifications
Speed: Twisted-pair:
10/20Mbps for half/full duplex
100/200Mbps for half/full duplex
1000/2000Mbps for full duplex
Fiber Optic:
200Mbps / 2000Mbps for full duplex
Flow Control: Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size: 9K
LED: System: Power 1, Power 2 and Fault LED (Green)
Fiber 1000BASE-X: LNK/ACT (Green)
TP 10/100/1000BASE-T: LNK/ACT, 1000 (Green)
PoE: Power-in-use (Orange)
Dimensions (W x D x H): 135 x 87 x 32 mm
Weight: IGTP-802T: 510g
IGTP-802TS: 510g
IGTP-805AT: 500g
Unit Input Voltage: 12 ~ 48V DC
24V AC
Power Consumption: 24V: 4.3watts/14BTU, 48V: 4.8watts/16BTU (without PoE)
24V: 33watts/112BTU, 48V: 31watts/105BTU (with PoE)
Link Fault Passthrough DIP Switch: ON/OFF
Enclosure: IP30 metal case
Installation: DIN-rail kit and wall-mount ear
ESD Protection: 6KV DC
Alarm: Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Cables: 10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA/TIA-568 100-ohm STP (maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm optical fiber
Single-mode: 9/125μm optical fiber
Standards Conformance
Regulatory Compliance: FCC Part 15 Class A, CE
Protocols and Standards Compliance: IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Stability Testing: IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature: Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity: Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)