ioLogik E1260 MOXA serial remote io server

ioLogik E1260 MOXA

ioLogik E1260

Remote Ethernet I/O with 6RTD, and 2-port Switch

Quantità':

Prezzo per pezzo

€ 334,42

(IVA esclusa)

€ 407,99 (IVA inclusa)

Prezzo di 1 pz. iva (22%) inclusa: € 407,99

Disponibilità: limitata

Brand: MOXA

SKU: 91838

Model: ioLogik E1260

Bisogno di aiuto?


Certificati

CE Certificato
FCC Certificato
UL Certificato
IEC Certificato
ATEX Certificato
RoHS Certificato

Features and Benefits

  • Support Modbus/TCP Protocol
  • Active communication with patented Active OPC Server
  • 2-port Ethernet switch for daisy-chain topologies
  • Easy mass deployment and configuration with ioSearch utility
  • Save time and wiring cost with peer-to-peer communication
  • User-defined Modbus/TCP addressing
  • Simplify I/O managment with MXIO library on either Windows or Linux platform
  • Supports SNMPv1/v2c
  • UL/cUL Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature: -40 to 75°C ( -40 to 167°F )

Introduction

A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1260 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1260 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost. In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik E1200 series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs. For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying the configurations. Users need to locate each device’s networking details like I/O channels, or vendor-defined addresses to enable the initial or start address of a SCADA system or PLC. The ioLogik E1200, with user-definable Modbus/TCP addressing, offers greater flexibility, and setup is easy. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.

Inputs and Outputs

RTD Inputs: 6 channels
Isolation: 3k VDC or 2k Vrms

RTD Inputs

Input Type:
     PT50, PT100, PT200, PT500 (-200 to 850°C)
     PT1000 (-200 to 350°C)
     Resistance of 310, 620, 1250, and 2200 ohms
Input connection: 2 or 3 wire
Sampling Rate:
     All channels: 12 samples/sec
     For channel: 2 samples/sec
     Only one channel enabled: 12 samples/sec
Resolution: 0.1°C or 0.1 ohm
Accuracy:
     ±0.1% FSR @ 25°C
     ±0.3% FSR @ -40 and 75°C
Input Impedance: 625k ohms

Power Requirements

Power Consumption: 110 mA @ 24 VDC

MTBF (mean time between failures)

Time: 660,260 hrs
Database: Telcordia (Bellcore)

LAN

Ethernet: 2 switched 10/100 Mbps RJ45 ports
Protection: 1.5 kV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP

Power Requirements

Power Input: 24 VDC nominal, 12 to 36 VDC

Physical Characteristics

Wiring: I/O cable max. 14 AWG
Dimensions: 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight: Under 200 g
Mounting: DIN rail or wall

Environmental Limits

Operating Temperature:
     Standard Models: -10 to 60°C (14 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508
EMI: EN 55022; EN 61000-3-2; EN 61000-3-3;
FCC Part 15, Subpart B, Class A
EMS:
     EN 55024, EN 61000-4-2, EN 61000-4-3,
     EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
     EN 61000-4-8, EN 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE
Hazardous Location: UL/cUL Class I Diision 2, ATEX Zone 2

Warranty

Warranty Period: 5 years (excluding ioLogik E1214)
Note: Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.

Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Advantech
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Contattaci via email: clicca qui

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade