ioLogik E1510-M12-CT-T MOXA serial remote io server

Features

• Compliant with EN 50121-3-2, EN 50121-4 and essential sections of EN 50155
• Wide operating temperature: -40 to 85°C (-40 to 185°F)
• Channel-to-Channel isolation (DI Only)
• Robust and compact design for harsh environment
• Active communication with patented Active OPC Server
• User-defined Modbus/TCP addressing
• Friendly configuration via web browsers

Introduction

The ioLogik E1510 Ethernet Remote I/O product has a ruggedized aluminum housing, and is compliant with EN 50121-3-2, EN 50121-4 and essential sections of EN 50155 standard, both of which are essential for electronic equipment used in rolling stock applications. This rugged platform features a wide operating temperature range of -40 to 85°C to deliver consistent performance in harsh environment. Channel to channel isolation provides the most robust protection against electrical surges. With this topology, each DI channel on the ioLogik E1510 is individually isolated to ensure highly stable data communication. In cases of high surge events such as lighting strikes, the device is protected from current surge by this channel isolation feature. This is a critical requirement in railway applications when considering an Ethernet-based I/O solution. Moxa’s patented Active OPC Server is a software package that operates as an OPC driver for HMI and SCADA systems . The Active OPC server enables the ioLogik E1510 to actively communicate with the SCADA system to provide instant I/O status.

Inputs and Outputs

Digital Inputs: 12 channels (channel-to-channel isolation)
Isolation: 3K VDC or 2K Vrms

Digital Input

Sensor Type: Wet Contact (NPN or PNP), Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
     On: short to GND
     Off: open
Wet Contact (DI to GND):
     On: 0 to 3 VDC
     Off: 10 to 30 VDC
Counter Frequency: 250 Hz
Digital Filtering Time Interval: Software Configurable
(minimum: 1 millisecond)

Power Requirements

Power Consumption: 163 mA @ 24 VDC

LAN

Ethernet: 1 10/100 Mbps, M12
Protection: 1.5 KV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, HTTP

Power Requirements

Power Input: 24 VDC nominal, 12 to 48 VDC
Note: Compliant with EN 50155 at 24 VDC

Physical Characteristics

Wiring: I/O cable max. 14 AWG
Dimensions: 144 x 124 x 30 mm (5.67 x 4.88 x 1.18 in)
Weight: 825 g
Mounting: DIN rail (standard), wall (with optional kit)

Environmental Limits

Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Conformal Coating: Applies only to -CT models
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508
EMI: EN 61000-3-2, EN 61000-3-3, EN 61000-6-4, FCC Part 15 Subpart B Class A
EMS: 
     EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
     EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11,
     EN 61000-6-2
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Rail Traffic: EN 50155, EN 50121-3-2, EN 50121-4
Green Product: RoHS, CRoHS, WEEE

Warranty

Warranty Period: 5 years