ioLogik E2262-T MOXA active ethernet io server

ioLogik E2262-T MOXA

ioLogik E2262-T

Active Ethernet I/O server, 8TC/4DO, -40 to 75°C

Quantità':

Prezzo per pezzo

€ 859,00

(IVA esclusa)

€ 1.047,98 (IVA inclusa)

Prezzo di 1 pz. iva (22%) inclusa: € 1.047,98

Disponibilità: 20 gg lav

Brand: MOXA

SKU: 92750

Model: ioLogik E2262-T

Bisogno di aiuto?


Prodotti Correlati

MOXA

MX-AOPC UA Server

Prezzo:  € 606,04   

Certificati

CE Certificato
FCC Certificato
UL Certificato
IEC Certificato
RoHS Certificato

Features and Benefits

  • Active communication with patented Active OPC Server
  • Smart Alarm management with email, SNMP Trap, TCP, UDP
  • Supports SNMPv1/v2c/v3 protocol
  • Save time and wiring costs with peer-to-peer communication
  • Front-end intelligent with patented Click&Go control logic, up to 24 rules
  • Friendly configuration with web browser

Introduction

Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.

Inputs and Outputs

Thermocouple Inputs: 8 channels
Digital Outputs: 4 channels

Thermocouple Input

Sensor Type: J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C)
Millivolt Type:
     Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV
     Fault and over-voltage protection: -35 to +35 VDC (power off);
     -25 to +30 VDC (power on)
Sampling Rate: 12 samples/sec (all channels)
Resolution: 16 bits
Accuracy:
     ±0.1% FSR @ 25°C
     ±0.3% FSR @ -10 and 60°C
     ±0.5% FSR @ -40 and 75°C
Input Impedance: 1 M ohms

Digital Output

Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 100 Hz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 175°C
Current Rating: 200 mA per channel
Isolation: 3k VDC or 2k Vrms

Power Requirements

Power Consumption: 160 mA @ 24 VDC

MTBF (mean time between failures)

Time: 341,063 hrs
Database: Telcordia (Bellcore)

LAN

Ethernet: 1 10/100 Mbps RJ45 port
Protection: 1.5 kV magnetic isolation
Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP

Serial Communication

Interface: RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection: 15 kV ESD for all signals

Serial Communication Parameters

Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Baudrate: 1200 to 115200 bps
Protocol: Modbus/RTU

Power Requirements

Power Input: 24 VDC nominal, 12 to 36 VDC

Physical Characteristics

Wiring: I/O cable max. 14 AWG
Dimensions: 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight: under 250 g
Mounting: DIN rail or wall

Environmental Limits

Operating Temperature:
     Standard Models: -10 to 60°C (14 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508
EMI: EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC Part 15, Subpart B, Class A
EMS:
     EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
     EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
     EN 61000-4-11, EN 61000-6-2
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE

Warranty

Warranty Period: 5 years (excluding ioLogik E2214*)
*Note: Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.

Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Teltonika
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade