ioMirror E3210 MOXA peer to peer io servers

Features and Benefits

•  Direct input-to-output signal communication over IP
•  High-speed peer-to-peer I/O within 20 ms
•  One physical alarm port for connectivity status
•  Utility for quick and easy web-based settings
•  Local alarm channel
•  Remote alarm message
•  Supports Modbus TCP for remote monitoring
•  Optional LCD module for easy configuration

Introduction

The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.

Specifications

Input/Output Interface

Digital Input Channels: 8
Digital Output Channels: 8
Alarm Contact Channels: 1
Isolation: 3k VDC or 2k Vrms
Buttons: Reset button

Digital Inputs

Connector: Screw-fastened Euroblock terminal
Digital Filtering Time Interval: Software configurable
 
Dry Contact: 
On: short to GND
Off: open
 
I/O Mode: DI
Over-Voltage Protection: 36 VDC
Points per COM: 8 channels
 
Sensor Type 
Dry contact: 
Wet Contact (NPN)
 
Wet Contact (DI to GND): 
On: 10 to 30 VDC
Off: 0 to 3 VDC

Digital Outputs

Connector: Screw-fastened Euroblock terminal
rrent Rating: 200 mA per channel
I/O Mode: DO
I/O Type: Sink
Over-Current Protection: 0.6 A per channel @ 25°C
Over-Temperature Shutdown: 160°C (min.)
Over-Voltage Protection: 35 VDC

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector): 1
Magnetic Isolation Protection: 1.5 kV (built-in)
 

Ethernet Software Features

Configuration Options: Web Console (HTTP)
               Windows Utility (ioMirrorAdmin)
 
Industrial Protocols: Modbus TCP Server (Slave)

Management 

BOOTP: 
DHCP Client
HTTP
TCP/IP
UDP
 
Time Management: SNTP

Modbus TCP

Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16

LED Interface

LED Indicators: PWR, Ready

Power Parameters

Power Connector: Screw-fastened Euroblock terminal
No. of Power Inputs: 1
Input Voltage: 12 to 48 VDC
Power Consumption: 136 mA @ 24 VDC

Alarm Contacts

I/O Type: Sink
Current Rating: Max. 200 mA per channel
Connector: Screw-fastened Euroblock terminal

Physical Characteristics

Housing: Plastic
Dimensions: 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight: 205 g (0.45 lb)
Wiring: 
 I/O cable, 16 to 26 AWG
 Power cable, 16 to 26 AWG
 
Installation: 
Wall mountingDIN-rail mounting

Environmental Limits

Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude 
2000 m: Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Standards and Certifications

Freefall: IEC 60068-2-32
EMI: EN 61000-6-4, FCC Part 15B Class A
Safety: UL 508
Shock IEC 60068-2-27
Vibration: IEC 60068-2-6
EMS: 
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
 

MTBF

Time: 231,020 hrs
 
Standards: Telcordia SR332

Warranty

Warranty Period: 5 years