NMS-500
Enterprise-class Universal Network Management Controller
Bisogno di aiuto?
Enterprise-class Universal Network Management Controller
PLANET's NMS-500 Network Management System can monitor all kinds of deployed network devices, such as managed switches, media converters, routers, smart APs, VoIP phones, IP cameras, etc., compliant with the SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility. It thus enables the administrator to centrally manage a network of up to 512 nodes from a central office, greatly boosting network and power management efficiency. With its user authentication management, the NMS-500 enhances data transmission security in the modern factory automation systems.
Specifications
Platform
Form Factor: Desktop
Processor: Intel® Celeron® N3350 up to 2.6 GHz
Memory: 2GB SDRAM, DDR3L-1866, 256M*16bit
Physical Specifications
I/O Interface: Five10/100/1000BASE-T RJ45 ports with auto-MDI/MDI-X
2 USB 3.0 ports (They cannot be used at the same time.)
1 RS232-to-RJ45 console port (115200, 8, N, 1)
1 DC jack power input
1 power switch
1 reset button
Storage: 8GB EMMC5.1, 15nm/2 eMLC
Dimensions (W x D x H): 232 x 153 x 44 mm
Weight: 1.15 kg
Enclosure: Metal
Power Requirements: 60W adapter 12V 5A with DC jack
AC 100~240V, 3~1.5A, 60~50Hz.
Environment & Certification
Temperature: Operating: 0 ~ 40 degrees C
Storage: -20 ~ 75 degrees C
Humidity: 10 ~ 85% relative humidity (non-condensing)
MTBF (Hours): 120
Network Management
Number of Managed Devices: 512
Number of RADIUS Client Devices: 512
Number of RADIUS User Accounts: 10
Auto Discovery: Supports PLANET devices
Dashboard: Summarized system overview includes online device numbers, activated client numbers
Device List: Allows creation and maintenance of device profiles
Topology View: Provides visual topology view of connected PLANET devices
Status Monitoring: Real-time online/offline devices
Event and Syslog Report: Real-time system event and syslog server supported
Event Alarm Define: Allows event alarm item option
SMTP Alarm: E-mail alert to the administrator via the SMTP server
SSID/RF Profile: Allows creation and maintenance of multiple wireless profiles
Cluster Management: Allows AP grouping for bulk provisioning and batch upgrading
Bulk AP Provisioning: Supports bulk AP provisioning with user-defined profiles
Bulk AP Firmware Upgrade: Supports bulk AP firmware upgrade
Coverage Heat Map: Enables real signal coverage of managed AP reflecting on the uploaded zone maps
Graphical Statistics: Real-time and historical visibility of wireless traffic flow
Backup/Restoration: Provides system and profile backup/restoration
SSIDs-to-VLANs Mapping: Allows to configure SSIDs-to-VLANs mapping in supported APs
RADIUS Authentication: RADIUS server is integrated for client authentication in a large-scale enterprise network
User Account Management: Supports on-demand account creation per user-defined access policy
Network Services
Network: DDNS: Supports PLANET DDNS/Easy DDNS
DHCP: Built-in DHCP Server for auto IP assignment to APs
Management: Console; Telnet; SSL; Web browser (Chrome is recommended); SNMP v1, v2c, v3
Discovery: Supports SNMP, ONVIF and PLANET Smart Discovery
Maintenance: Backup: System backup and restore to local or USB HDD
Reboot: Provides system reboot manually or automatically per power schedule
Diagnostic: Provides IPv4/IPv6 ping and trace route
Standards Conformance
Regulatory Compliance: CE, FCC
Standards Compliance: IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow control and back pressure
IEEE 802.3z Flow control with Rx thresholds and Tx pause frames
IEEE 1588 protocol and IEEE 802.1AS implementation
IEEE 802.3az (EEE)
[Remarks]: Router: Log in to the router’s Web user interface and enable the SNMP function.
Switch: Log in to the switch’s Web user interface and enable the SNMP and LLDP function.
AP: Log in to the AP’s Web user interface to configure the AP to “Managed AP”. In support of SNMP AP, enable the SNMP function.
IP Cam: The ONVIF function is enabled by default.