UC-8410A-T-LX MOXA Arm-Based Computers

 Features and Benefits

• NXP LS1021A Cortex-A7 1.2 GHz dual-core processor

• 8 GB eMMC with OS preinstalled

• 1 GB DDR3 SDRAM

• 8 x RS-232/422/485 serial ports

• 3 x 10/100/1000 Mbps Ethernet ports

• 1 x mini-PCIe socket for wireless expansion

• -40 to 75°C system operating temperature

• Ready-to-run Debian 8

Introduction

The UC-8410A Series embedded computers support a rich collection

of communication interfaces, including 8 RS-232/422/485 serial ports,

3 Ethernet ports, 1 PCIe mini slot for a wireless module, 4 digital input

channels, 4 digital output channels, 1 mSATA slot, and 2 USB 2.0

hosts.

The UC-8410A computer uses the NXP Cortex-A7 dual-core 1 GHz

CPU. This powerful computing engine supports several useful

communications functions, without generating too much heat.

The built-in 4 GB eMMC and 1 GB DDR3 SDRAM give you enough

memory to run your application software, and the SD slot and mSATA

socket provides the flexibility of adding additional data storage. 

The UC-8410A comes with a variety of communication interaces,

including serial ports, Ethernet ports, wireless communication slot, and

digital input/output channels, making them ideal as communication

platforms for industrial applications that require network and device

communications.

The UC-8410A Series comes with Linux Debian 8 preinstalled to

provide an open software operating system for software program

development. This makes the UC-8410A computer an optimal solution

for use with industrial applications, but at minimal cost and effort. In

addition to the standard model, a -40 to 75°C wide-temperature model

is also available for harsh industrial environments.

Hardware Specifications

Computer

CPU: Armv7 Cortex-A7 dual-core 1.2 GHz

USB: USB 2.0 hosts x 2, Type A connector

DRAM: 1 GB DDR3 SDRAM onboard

Storage

Main Storage: 8 GB eMMC with OS preinstalled

Storage Expansion: 1 SD card slot, 1 mSATA slot

Other Peripherals (does not apply to “-NW” models)

Expansion Slot: 1 Mini-PCIe socket w/ USB + PCIe signal

USIM: 1 USIM slot

Wireless SMA Interface: 2 SMA connectors

Ethernet Interface

LAN: Auto-sensing 10/100/1000 Mbps ports (RJ45) x 3

Magnetic Isolation Protection: 1.5 kV built-in

Serial Interface

Serial Standards: RS-232/422/485 software-selectable ports (8-pin

RJ45) x 8

Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200,

n, 8, 1)

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction

control) for RS-485

Baudrate: 50 bps to 115.2 kbps (supports nonstandard baudrates; see

user’s manual for details)

Serial Signals

RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422: TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w: Data+, Data-, GND

Digital Input

Input Channels: DI x 4

Input Voltage: 0 to 30 VDC

Digital Input Levels for Dry Contacts:

• Logic level 0: Close to GND

• Logic level 1: Open

Digital Input Levels for Wet Contacts:

• Logic level 0: +10 to +30 V (COM to DI)

• Logic level 1: +3 V max.

Connector Type: 10-pin screw terminal block (4 points, COM, GND)

Isolation: 3 kV optical isolation

Digital Output

Output Channels: 4, sink type

Output Current: Max. 200 mA per channel

On-State Voltage: 24 VDC nominal, open-drain to 30 V

Connector Type: 10-pin screw terminal block (4 points, GND)

Isolation: 3 kV optical isolation

LEDs

System: Power, Ready, Storage, Diagnostic, Wireless signal strength

LAN: 100M/Link/Act x 3, 1000M/Link/Act x 3 (on connector)

Serial: TxD x 8, RxD x 8 (on connector)

Reset Button: Supports “Reset to Factory Default and System

diagnostics”

Physical Characteristics

Housing: SECC sheet metal (1 mm)

Weight: 1000 g (2.21 lb)

Dimensions: 200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in)

Mounting: Wall

Environmental Limits

Operating Temperature:

Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature:

Standard Models: -20 to 75°C (-4 to 167°F)

Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

Anti-Vibration: 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr

per axis

Anti-Shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms

Power Requirements

Input Voltage: 12 to 48 VDC (3-pin terminal block, V+, V-, SG)

Input Current: 790 mA @ 24 VDC

Power Consumption: 19 W

Standards and Certifications

Safety: UL 60950-1

EMC:

EN 55032/24

EMI: CISPR 32, FCC Part 15B Class A

EMS: IEC 61000-4-2 ESD: Contact 4 kV; Air 8 kV

IEC 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz)

IEC 61000-4-4 EFT: Power 0.5 kV; Signal 0.5 kV

IEC 61000-4-5 Surge: Power 0.5 kV; Signal 1 kV

IEC 61000-4-6 CS: 3 V

IEC 61000-4-8

Reliability

Alert Tools: Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Warranty

Warranty Period: 5 years

Software Specifications

Linux

OS: Debian 8 (preinstalled on eMMC)

Web Server (Apache): Allows you to create and manage websites;

supports PHP and XML

Terminal Server (SSH): SSH allows remote login to a secure

encrypted console from any connected network

Kernel:

GNU/Linux 3.12

System Shell: DASH, BASH

Text Editor: vim, nano

File System: Ext2, Ext3, Ext4

Internet Protocol Suite: TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, ARP,

HTTP, CHAP, PAP, DHCP, NTP, NFS, SSH, PPP, SFTP, RSYNC, SSL

Programming Language Support: PHP, Perl, Python

Internet Security: OpenVPN, iptables

Cryptographic Hardware Accelerators: AES, SHA, OpenSSL

Self Diagnosis: Check status of system and hardware component via

software method

Linux Board Support Packages (BSP): GCC C/C++ cross development

tool chain

Bootloader/ Kernel/ filesystem

Cellular Networking: Allows UNIX machines to connect to the

Internpppd for an Internet connection.

Connect talcomm MSM Interface: Glib-based library for talking to

WWAN modems and devices that speak the Qualcomm MSM Interface

(QMI) protocol.

Watchdog: Features a hardware function to trigger system reset in a

user-specified time interval (Linux standard provided)

Application Development Software:

• Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/

DO API)

• GNU C/C++ cross-compiler

• GNU C library

• GDB source-level debugging server

Software Protection: Encryption tool for user executable files (based

on patented Moxa technology)