VPort P06-2M28M-T MOXA Ip cameras

 Features and Benefits

•  1/3” progressive scan camera with maximum 1920 x 1080 resolution at up to 30 fps
•  High quality video imaging with DNR and WDR
•  Up to 4 simultaneous H.264 or MJPEG independent video streams
•  DynaStream™ for optimized network efficiency
•  CBR Pro™ for high image quality in limited bandwidth transmissions
•  Supports SDXC (up to 2 TB SD card) for local storage
•  1 built-in audio input or microphone
•  ONVIF conformity for standardization and interoperability

 Introduction

The VPort 06-2 cameras are compact, 1080P (1920 x 1080), H.264/MJPEG dome IP cameras designed for mobile video surveillance applications. The cameras are compliant with EN 62262 IK8, mandatory sections of EN 50155, and support a -25 to 55°C or -40 to 70°C operating temperature range. With a rugged M12 Ethernet port, SDXC slot for SD cards up to 2 TB, ONVIF Profile S standardization, built-in audio line port or microphone, PoE or 24 VDC power inputs, IP66-rated, and the option of changing the lens, the VPort 06-2 cameras will perform reliably in a variety of extreme environmental conditions, making them suitable for a wide variety of mobile video surveillance applications.

Specifications

Memory

microSD Slot: SDXC

Input/Output Interface

Digital Input Channels: 1
Digital Inputs: 
        +13 to +30 V for state 1
        -30 to +1 V for state 0
        Max. input current: 8 mA
Connector: DB9 male

Ethernet Interface

10/100BaseT(X) Ports (M12 D-coded 4-pin female connector): 1

Ethernet Software Features

Protocols: TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS, SIP

Security Functions

Password: User-level password protection
Filter: IP address
Encryption: HTTPS

Power Parameters

No. of Power Inputs: 1
Input Voltage: 12/24 VDC
Input Current: 0.86 A @ 12 VDC, 0.38 A @ 24 VDC
Power Connector: DB9 male

Camera Characteristics

Sensor: 1/3-in 1080P progressive scan CMOS
Lens: f=2.8 mm, F2.0, Diagonal 94°, Horizontal 85°, Vertical 45°
Minimum Illumination: Color: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
Synchronization: Internal
White Balance: ATW/AWB
Electronic Shutter: Auto, Fixed (1/30 to 1/25000 sec)
S/N Ratio: Maximum 50 dB (AGC off; DNR on)
DNR (digital noise reduction): Built-in 2D/3D DNR
WDR (wide dynamic range): 100 dB
AGC (auto gain control): 2X, 4X, 8X, 16X
Flickerless Control: Automatic, 50 Hz, 60 Hz modes
Image Rotation: Flip, Mirror, 90°, 180°, 270° rotation
Image Setting: Manual tuning with saturation, sharpness, and contrast
Camera Angle: Pan: ±15°, Tilt: 0° to 90° (controlled manually)

Video Interface

Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
Video Output: via Ethernet
Video Streams: 4 independent H.264 or MJPEG video streams

Audio Interface

Audio Format: 
        Mono, PCM (G.711)
        AAC
Audio Inputs: 1 x built-in microphone

Camera Software Development

Video Standards
ONVIF Profile S

Camera Alarm Software Features

Intelligent Video: Camera tampering detection
Video Motion Detection: 3 independently configurable areas
Shock Detection: Built-in G sensor
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Custom Alarms: HTTP event servers for setting customized alarm actions
FTP Messaging: Automatic transfer of stored images via FTP as event-triggered actions
Pre-Alarm Buffer: 50 MB video buffer for JPEG snapshot images
Video Recording: Event recordings stored on the SD card

Software Requirements

Memory Size: 2 GB
Operating System: Windows 7 or above
Browser: Internet Explorer 9.x or above
Multimedia: DirectX 9.0C or above

Physical Characteristics

Housing:
        IP66 rain and dust protection
        Metal housing, PC dome cover
        IK8 vandal resistant protection
Dimensions: 110 x 115.5 x 61.8 mm (4.33 x 4.53 x 2.43 in)
Weight: 620 g (1.37 lb)
Installation: Panel mounting

Environmental Limits

Operating Temperature: -40 to 70°C
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ingress Protection: IEC 60529, IP66
Vandal Resistance: EN 62262, IK8
Altitude: 2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

Standards and Certifications

EMI: CISPR 32, FCC Part 15B Class A
EMS:
        IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
        IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
        IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
        IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
        IEC 61000-4-6 CS: 10 V
        IEC 61000-4-8 PFMF
Freefall: IEC 60068-2-31
Railway Fire Protection: EN 45545-2
Safety: UL 60950-1
Shock: IEC 60068-2-27, IEC 61373, EN 50155
Vibration: IEC 60068-2-64, IEC 61373, EN 50155
Railway: EN 50155 (complies with a portion of EN 50155 specifications), GB/T 24338.4-2009

MTBF

Time: 1,039,008 hrs
Standards: Telcordia SR332

Warranty

Warranty Period: 5 years