DDR-120C-24 Mean Well Barra DIN

DDR-120C-24 Mean Well

DDR-120C-24 Mean Well

DDR-120C-24

DC-DC DIN Rail Converter 120W, input voltage range 33.6-67.2VDC, output 24VDC 5A, ultra slim width 32 mm

Clicca per maggiori dettagli

Q.tà':

Articoli Prezzo (IVA esc.)
1+ pz.€ 112,26

Prezzo di 1 pz. iva (22%) inclusa: € 136,96

  >> I tempi protrebbero essere piĆ¹ lunghi da quelli indicati <<

Brand: MEAN WELL

SKU: 115892

Model: DDR-120C-24

Line: Input Voltage Range 33.6-67.2VDC

DDR-120 series is a 120W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (32mm), 2: 1  ultra wide input voltage, fanless design -40~+70℃ wide operating temperature, 4KVdc I/O isolation, 150% peak load, adjustable output voltage and full protective functions. 
This series of models has various input options: 9~18V /16.8~33.6V / 33.6~67.2V / 67.2~154V and various output options: 12V / 24V / 48V and can be used for industrial & railway control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable...etc.

Feature

  • Compliance to EN50155 and EN45545-2 railway standard
  • Width only 32mm
  • 2:1 wide input range
  • -40~+70℃ wide working temperature
  • 150% peak load capability
  • DC output adjustable
  • Cooling by free air convection
  • Can be installed on DIN rail TS-35/7.5 or 15
  • Protections: Short circuit / Overload / Over voltage / Input reverse polarity / Input under voltage protection
  • 4KVdc I/O isolation(Reinforced isolation)
  • 3 years warranty

Applications

  • Bus, tram, metro or railway system
  • Industrial control system
  • Semi-conductor fabrication equipment
  • Factory automation
  • Electro-mechanical
  • Wireless network  
  • Telecom or datacom system

Specifications

OUTPUT

DC VOLTAGE: 24V
RATED CURRENT: 5A
CURRENT RANGE: 0 ~ 5A
RATED POWER: 120W
PEAK CURRENT: 7.5A
PEAK POWER: 180W (3sec.)
RIPPLE & NOISE (max.): 50mVp-p
VOLTAGE ADJUSTMENT RANGE: 24 ~ 28V
VOLTAGE TOLERANCE: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±1.0%
SETUP, RISE TIME: 500ms, 60ms @48Vdc

INPUT

VOLTAGE RANGE: 33.6 ~ 67.2Vdc
EFFICIENCY (Typ.): 91%
DC CURRENT (Typ.): 2.8A @48Vdc
INRUSH CURRENT (Typ.): 5A @48Vdc
INTERRUPTION OF VOLTAGE SUPPLY: EN50155:2007-comply with S1 level (6ms) @ full load, S2 level (10ms) @ 60% load
EN50155:2017-comply with S1 level
 
PROTECTION
OVERLOAD: Normally works within 150% rated output power for more than 3 seconds and then constant current protection 105~135% rated output power with auto-recovery
 
OVER VOLTAGE: 28.8 ~ 33.6V
Protection type: Shut down o/p voltage, re-power on to recover
 
REVERSE POLARITY: By internal MOSFET, no damage, recovers automatically after fault condition removed 
 
UNDER VOLTAGE LOCKOUT: 48Vin (C - type): Power ON≥33.6V , OFF≤33V

ENVIRONMENT

WORKING TEMP.: -40 ~ +70°C (Refer to "Derating Curve")
WORKING HUMIDITY: 5 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85°C, 5 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 55°C) RH non-condensing
VIBRATION: Component: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC61373
OPERATING ALTITUDE: 5000 meters

SAFETY & EMC

SAFETY STANDARDS: IEC 62368-1, UL 62368-1, EAC TP TC 004, AS/NZS 62368.1 approved; design refer to UL508
WITHSTAND VOLTAGE: I/P-O/P:4KVdc     I/P-FG:2.5KVdc     O/P-FG:2.5KVdc
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500Vdc / 25℃/ 70% RH 
 
EMC EMISSION:
EN55032 Conducted: Class B
EN55032 Radiated: Class B
EN61000-3-3 Voltage Flicker
Harmonic Current
 
EMC IMMUNITY:
EN55024 , EN61000-6-2(EN50082-2)
EN61000-4-2 ESD: Level 3, 8KV air ; Level 3, 6KV contact; criteria A
EN61000-4-3 Radiated: Level 3, 10V/m ; criteria A
EN61000-4-4 EFT/Burst: Level 3, 2KV ; criteria A
EN61000-4-5 Surge: Level 3, 1KV/Line-Line ;Level 3, 2KV/Line-Line-FG ;criteria A
EN61000-4-6 Conducted: Level 3, 10V ; criteria A
EN61000-4-8 Magnetic Field: Level 4, 30A/m ; criteria A
 
RAILWAY STANDARD:
Compliance to EN45545-2 for fire protection ; Meet EN50155 / IEC60571 including IEC61373 for shock & vibration, EN50121-3-2 for EMC
 
MTBF: 214.6K hrs min.      MIL-HDBK-217F (25°C)
DIMENSIONS: (WxHxD) 32 x 125.2 x 102 mm

Le immagini e le caratteristiche dei prodotti presenti sul sito sono di proprietà di Mean Well Inc. E' espressamente vietata la riproduzione dei contenuti del sito in qualsiasi modo ed a qualsiasi scopo senza la preventiva autorizzazione scritta da parte di Lastella Trade o Mean Well Inc. Le immagini presenti sono a puro titolo esplicativo, in alcuni casi sono foto di gruppo e potrebbero subire variazioni senza preavviso, per le caratteristiche del prodotto fa fede la descrizione prodotto.





Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Advantech
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter