DDR-480B-24
DC-DC DIN Rail Converter 480W, input voltage range 16.8-33.6VDC, output 24VDC 20A, ultra slim width 85.5 mm
Bisogno di aiuto?
DDR-480 series is a 480W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (85.5mm), 2: 1 wide input voltage, fanless design -40~+80℃ wide operating temperature, 4KVdc I/O isolation, 150% peak load, current sharing, DC OK, adjustable output voltage and full protective functions.
This series of models has various input options: 16.8~33.6V / 33.6~67.2V / 67.2~154V and multiple output options: 12V / 24V / 48V and can be used for industrial & railway control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable...etc.
Feature
- Compliance to EN50155 and EN45545-2 railway standard
- Width only 85.5mm
- 2:1 wide input range
- -40~+80℃ wide operating temperature
- 150% peak load capability
- Current sharing up to 1920W(3+1)
- DC output adjustable
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage / over temperature / Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- DC OK relay contact
- Remote ON-OFF control
- Operating attitude up to 5000 meters
- 3 years warranty
Applications
- Bus, tram, metro or railway system
- Industrial control system
- Semi-conductor fabrication equipment
- Factory automation
- Electro-mechanical
- Wireless network
- Telecom or datacom system
Specifications
OUTPUT
DC VOLTAGE: 24V
RATED CURRENT: 20A
CURRENT RANGE: 0 ~ 20A
RATED POWER: 480W
PEAK CURRENT 5sec.: 30A
PEAK POWER 5sec.: 12Vo: 601.2W, 24Vo / 48Vo: 720W
RIPPLE & NOISE (max.): 120mVp-p
VOLTAGE ADJUSTMENT RANGE: 24 ~ 28V
VOLTAGE TOLERANCE: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±1.0%
SETUP, RISE TIME: 500ms, 60ms
INPUT
VOLTAGE RANGE CONTINUOUS: 16.8 ~ 33.6Vdc
VOLTAGE RANGE 100ms: 14.4 ~ 16.8Vdc
EFFICIENCY (Typ.): 91%
DC CURRENT (Typ.): 23A @24Vdc
INRUSH CURRENT (Typ.): 30A
INTERRUPTION OF VOLTAGE SUPPLY: EN50155: 2017- B/C/D type comply with S2 level (10ms)@ full load
EN50155:2017-Comply with S1 level
PROTECTION
OVERLOAD: Normally works within 150% rated output power for more than 5 seconds and then constant current protection 105~135% rated output power with auto-recovery
OVER VOLTAGE: 28.8 ~ 35V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down o/p voltage, re-power on to recover
REVERSE POLARITY: By internal, MOSFET, no damage, recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT: 24Vin (B - type): Power ON≥16.8V , OFF≤16.5V
FUNCTION
DC OK REALY CONTACT RATINGS (max.): 30Vdc/1A resistive load
CURRENT SHARING: Up to 1920W (3+1 units)
ENVIRONMENT
WORKING TEMP.: -40 ~ +80°C (Refer to "Derating Curve")
WORKING HUMIDITY: 5 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85°C, 5 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 55°C) RH non-condensing
VIBRATION: Component: 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC61373
OPERATING ALTITUDE: 5000 meters
SAFETY & EMC
SAFETY STANDARDS: UL 62368-1, IEC 62368-1, AS/NZS 62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE: I/P-O/P:4KVdc I/P-FG:2.5KVdc O/P-FG:0.71KVdc
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500Vdc / 25℃/ 70% RH
EMC EMISSION:
EN55032 (CISRP32) Conducted: Class A
EN55032 (CISRP32) Radiated: Class B
EN61000-3-3 Voltage Flicker
Harmonic Current
EMC IMMUNITY:
EN55024 , EN61000-6-2(EN50082-2)
EN61000-4-2 ESD: Level 3, 8KV air ; Level 3, 6KV contact; criteria A
EN61000-4-3 Radiated: Level 3, 10V/m ; criteria A
EN61000-4-4 EFT/Burst: Level 3, 2KV ; criteria A
EN61000-4-5 Surge: Level 3, 1KV/Line-Line ;Level 3, 2KV/Line-Line-FG ;criteria A
EN61000-4-6 Conducted: Level 3, 10V ; criteria A
EN61000-4-8 Magnetic Field: Level 4, 30A/m ; criteria A
RAILWAY STANDARD:
Compliance to EN45545-2 for fire protection ; Meet EN50155 / IEC60571 including IEC61373 for shock & vibration, EN50121-3-2 for EMC
MTBF: 280.0K hrs min. Telcordia SR-332 (Bellcore) ; 101.7K hrs min. MIL-HDBK-217F (25°C)
DIMENSIONS: (WxHxD) 85.5 x 125.2 x 128.5 mm