EDS-405A-MM-SC-T MOXA DIN Rail managed switches

Features and Benefits

• Command Line Interface (CLI) for quickly configuring major managed functions
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• DHCP Option 82 for IP address assignment with different policies
• Support EtherNet/IP, Modbus/TCP and PROFINET (EDS-405A/408A-PN series only) protocols for device management and monitoring
• EtherNet/IP EDS (Electronic Data Sheet) file, custom AOI (Add-On Instructions) and FactoryTalk® View faceplate available
• PROFINET GSDML file and SIMATIC STEP 7 device icons available (EDS-405A/408A-PN series only)
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
• QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
• RMON for efficient network monitoring and proactive capability
• SNMPv1/v2c/v3 for different levels of network management  security
• Bandwidth management to prevent unpredictable network status
• Port mirroring for online debugging

Introduction

The EDS-405A/408A are entry-level 5 and 8-port managed Ethernet switches designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-405A/408A switches.

Technology

Standards:
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X) and 100BaseFX
     IEEE 802.3x for Flow Control
     IEEE 802.1D-2004 for Spanning Tree Protocol
     IEEE 802.1w for Rapid STP
     IEEE 802.1p for Class of Service
     IEEE 802.1Q for VLAN Tagging
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog, DHCP Option 66/67/82, BootP, LLDP, PROFINET (EDS-405A/408A-PN series only), EtherNet/IP, Modbus/TCP, IPv6, NTP Server/Client
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch Properties

MAC Table Size: 2 K (EDS-405A), 8 K (EDS-408A)
Packet Buffer Size: 1 Mbit

Interface

Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC

Optical Fiber

Table:
     100BaseFX:
          Multi-mode:
               Wavelength: 1300 nm
               Max. TX: -10 dBm
               Min. TX: -20 dBm
               RX Sensitivity: -32 dBm
               Link Budget: 12 dB

               Typical Distance:
                    5 km
                    4 km

               Saturation: -6 dBm

          Single-mode:
               Wavelength: 1310 nm
               Max. TX: 0 dBm
               Min. TX: -5 dBm
               RX Sensitivity: -34 dBm
               Link Budget: 29 dB
               Typical Distance: 40 km
               Saturation: -3 dBm

Power Requirements

Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current:
     EDS-405A: 0.24 A @ 24 V
     EDS-405A-MM/SS: 0.32 A @ 24 V
     EDS-408A: 0.26 A @ 24 V
     EDS-408A-MM/SS: 0.35 A @ 24 V
     EDS-408A-3M/3S/2M1S/1M2S: 0.32 A @ 24 V
Overload Current Protection: Present
Connection: 1 removable 6-contact terminal block
Reverse Polarity Protection: Present

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight:
     EDS-405A, EDS-405A-MM, EDS-405A-SS: 650 g
     EDS-408A, EDS-408A-MM, EDS-408A-SS: 650 g
     EDS-408A-3M/3S/2M1S/1M2S: 890 g
Installation: DIN-rail mounting, wall mounting (with optional kit)

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

Safety: UL 508, UL 60950-1 (EDS-405A/408A, EDS-405A/408A 2 Fiber series only), CSA C22.2 No. 60950-1, EN 60950-1 (EDS-408A only)
Hazardous Location:
     UL/cUL Class 1 Division 2 Groups A/B/C/D ((EDS-405A/408A, EDS-405A/408A 2 Fiber series only),
     ATEX Zone 2 Ex nA nC IIC T4 Gc (EDS-405A, EDS-405A 2 Fiber series only),
     ATEX Zone 2 Ex nA nC op is IIC T4 Gc (EDS-408A, EDS-408A 2 Fiber series only)
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
     EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
     EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Marine:
     EDS-405A/408A, EDS-405A/408A 2 Fiber series: DNV, GL
     EDS-408A 3 Fiber series: DNV, GL, LR, ABS, NK
Traffic Control: NEMA TS2
Rail Traffic: EN 50121-4 (EDS-408A only)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6

MTBF (mean time between failures)

Time:
     EDS-405A Series: 392,000 hrs
     EDS-408A Series: 1,102,845 hrs
Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years