EDS-P206A-4PoE-SS-SC-T MOXA DIN Rail POE Unmanaged Switches

Features and Benefits

• IEEE 802.3af/at compliant PoE and Ethernet combo ports
• Up to 30 watts per PoE port
• 24/48 VDC wide range redundant power inputs
• Intelligent power consumption detection and classification
• Redundant dual VDC power inputs
• -40 to 75°C operating temperature range (T models)

Introduction

Download Industrial PoE Application PortfolioThe EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3af/at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network.

Technology

Standards:
     IEEE 802.3af/at for Power-over-Ethernet
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X)
     IEEE 802.3x for Flow Control
Processing Type: Store and Forward
Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch Properties

MAC Table Size: 1 K
Packet Buffer Size: 512 KB

Interface

Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
PoE Pinout: V-, V-, V+, V+ for pin 1, 2, 3, 6 (Endspan, MDI-X Alternative A)
LED Indicators: PWR1, PWR2, 10/100M, PoE

Optical Fiber

Table:
    100BaseFX:
         Multi-mode:
              Wavelength: 1300 nm
              Max. TX: -10 dBm
              Min. TX: -20 dBm
              RX Sensitivity: -32 dBm
              Link Budget: 12 dB

              Typical Distance:
                   5 km
                   4 km

              Saturation: -6 dBm

         Single-mode:
              Wavelength: 1310 nm
              Max. TX: 0 dBm
              Min. TX: -5 dBm
              RX Sensitivity: -34 dBm
              Link Budget: 29 dB
              Typical Distance: 40 km
              Saturation: -3 dBm

Power Requirements

Input Voltage: 24/48 (20 to 60 V) VDC, redundant dual inputs
Input Current: Max 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)
Overload Current Protection: Present
Connection: 1 removable 4-contact terminal block
Reverse Polarity Protection: Present

Physical Characteristics

Housing: Metal, IP30 protection
Dimensions: 50.3 × 115 × 70 mm (1.98 x 4.53 x 2.76 in)
Weight: 375 g
Installation: DIN-rail mounting, wall mounting (with optional kit)

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

Safety: UL 508
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
     EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
     EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
     EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6

MTBF (mean time between failures)

Time: 645,138 hrs
Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years