IES716-2GS, Layer 2 Managed Industrial Ethernet Switch, 2 ports 1000M SFP +4 ports 10/100Base-T(X) (RJ45), dual power supply 12~48VDC, -40~75°
IES716-2GS
Layer 2 Managed Industrial Ethernet Switch, 2 ports 1000M SFP +4 ports 10/100Base-T(X) (RJ45), dual power supply 12~48VDC, -40~75°
SPEDIZIONE GRATUITA
Bisogno di aiuto?
Introduction
IES716-2GS is 6-port 100M/gigabit layer 2 managed industrial Ethernet switch. This product provides 100M copper ports and gigabit SFP slots, and adopts DIN-Rail or wall mounting which can meet the requirements of different scenes.
Features and Benefits
- SNMPv1/v2c is used for network management of various levels
- Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
- QoS supports real-time traffic classification and priority setting
- File management is convenient for rapid configuration and online upgrade of the device
- Bandwidth management can reasonably distribute network bandwidth, preventing
- unpredictable network status
- Port statistics can be used for the port real time traffic statistics
- User password can conduct user hierarchical management to improve the device administrative security
- Relay alarm is convenient for troubleshooting of construction site
- Storm suppression can restrain broadcast, unknown multicast and unknown unicast
- VLAN can simplify the network planning
- Port trunking can increase network bandwidth and the reliability of network connection to achieve optimal bandwidth utilization
- IGMP-Snooping and static multicast can be used for filtering multicast traffic to save the network bandwidth
Specifications
Standard & Protocol
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1Q for VLAN
IEEE 802.1p for CoS
Management
SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, DHCP Client, File Management, Port Statistics Security Classification of User Permissions, Port Alarm , Power Supply Alarm
Switch Function
802.1Q Vlan, Static Port Aggregation, Bandwidth Management, Flow Control
Unicast / Multicast
Static Multicast, IGMP-Snooping
Redundancy Protocol
SW-Ring, STP/RSTP
Interface
Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning
SFP slot: 1000Base-SFP
Console port: CLI command line management port (RS-232), RJ45
Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity 1A@24VDC or 0.5A@120VAC
LED Indicator
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
Switch Property
Transmission mode: store and forward
MAC address: 8K
Packet buffer size: 1Mbit
Backplane bandwidth: 7.6G
Switch time delay: <10μs
Power Requirement
12~48VDC, 4-pin 7.62mm pitch terminal blocks Dual power supply redundancy, non-polarity, reverse connection protection
Power Consumption
No-load: ≤2.2W@24VDC
Full-load: ≤5.5W@24VDC
Environmental Limit
Operating temperature: -40~75℃
Storage temperature: -40~85℃
Relative humidity: 5%～95% (no condensation)
Physical Characteristic
Housing: IP40 protection, metal
Installation: DIN-Rail mounting or wall mounting
Dimension (W x H x D): 53mm×138mm×110mm
Weight: 690g
Industrial Standard
IEC 61000-4-2 (ESD), Level 4
Air discharge: ±15kV
Contact discharge: ±8kV
IEC 61000-4-5 (Surge), Level 4
Power supply: common mode±4kV, differential mode±2kV
Ethernet port: ±2kV
Relay: common mode±4kV, differential mode±2kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
5 years