IGS-1020PTF-12V Planet Gigabit PoE Unmanaged Switches

 Cost-effective Full PoE+ Power and Gigabit Extension Solution Ideal for Hardened Environment

Featuring Plug and Play designed to be installed in heavy industrial demanding environments, PLANET IGS-1020PTF-12V is an Industrial-grade, DIN-rail type Unmanaged Gigabit Ethernet PoE+ Switch with eight 10/100/1000BASE-T ports featuring IEEE 802.3at PoE+ and two 100/1000BASE-X fiber optic interfaces for uplink connection.
The IGS-1020PTF-12V is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 240 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 aluminum housing.

Applications

Industrial-grade PoE+ Switch for Building Automation and Security

Suitable for buildings where security is strictly enforced, the IGS-1020PTF-12V, with eight Gigabit Ethernet 802.3at PoE+ in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 8 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the IGS-1020PTF-12V makes the installation of IP cameras or wireless APs easier and more efficient.

Perfect Integration Solution for IP PoE Camera and NVR System

The IGS-1020PTF-12V provides eight 10/100/1000BASE-T 802.3at PoE+ ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the two 100/1000BASE-X SFP interfaces, the IGS-1020PTF-12V can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the IGS-1020PTF-12V facilitates the recorded video files from the 8 PoE+ IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The IGS-1020PTF-12V undoubtedly brings an ideal secure surveillance system at a lower total cost.

Features and Benefits

Physical Port

• Eight 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at/af PoE+ Injector (Ports 1 to 8)
• Two 100/1000BASE-X SFP slots for SFP transceiver type auto detection (Ports 9 to 10)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• 240-watt PoE budget
• Supports PoE power up to 30 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters

Industrial Case and Installation

• IP30 aluminum case 
• DIN-rail and wall-mount designs
• 12~56V redundant power with reverse polarity protection
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature 

Switching

• Hardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 8K MAC address table size
• 20Gbps switch fabric
• 9K jumbo frame
• Hardware-based DIP switch for “Standard” and  “Extend” mode selection; the “Extend” mode features 30-watt PoE transmission distance of 250m at speed of 10Mbps
• Automatic address learning and address aging

Specifications

Hardware Specifications

Copper Ports: 8 10/100/1000BASET RJ45 auto-MDI/MDI-X ports
PoE Injector Ports: 8 ports with 802.3at PoE+ injector function (Ports 1 to 8)
SFP Slots: 2 1000BASE-SX/LX/BX SFP interfaces (Ports 9 to 10)
Compatible with 100BASE-FX SFP
Connector: Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
DIP Switch: Standard/Extend mode (Extend mode for Ports 5 to 8 only)
LED Indicators: 3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Power Fault Alarm
8 x LED for PoE Copper Port (Ports 1 to 8):
Green: LNK/ACT (10/100/1000Mbps)
Amber: PoE-in-Use
2 x LED for 100/1000X Fiber Port (Ports 9 to 10):
Green: LNK/ACT (100/1000Mbps)
Amber: 1000Mbps
4 x LED for PoE Usage
Amber: 60W, 120W, 180W and 240W
Power Requirements: 12~56V DC, 6A (max.)
Power Consumption: Max. 5.6 watts/19BTU@56V DC input (System)
Max. 8.4 watts/29BTU@56V DC input (Ethernet Full Loading)
Max. 252.1 watts/860BTU@56V DC input (Ethernet + PoE Full Loading)
Dimensions (W x D x H): 77 x 106 x 152mm
Weight: 1164g
Enclosure: IP30 aluminum case
Installation: DIN-rail/ wall-mount
ESD Protection: 6KV

Switch Specifications

Switch Architecture: Store-and-Forward
Switch Fabric: 20Gbps
Throughput (packet per second): 14.8Mpps@64bytes
Address Table: 8K entries
Buffer Memory: 4M bits on-chip buffer memory
Jumbo Frame: 9Kbytes
Flow Control: Back pressure for half duplex
IEEE 802.3x pause frame for full duplex

Power over Ethernet

PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type: End-span
Power Pin Assignment: 1/2 (+), 3/6 (-)
PoE Power Output: Per port 54V DC
Max. 30 watts
PoE Power Budget (max.): 240W maximum @54V DC
120W maximum@24V DC
60W maximum@12V DC
Max. Number of Class 3 PDs@25W: 8

Standards Conformance

Regulatory Compliance: FCC Part 15 Class A, CE
Stability Testing: IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance: IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3az Energy Efficient Ethernet (EEE)
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet

Environment

Temperature: Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity: Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)