IMC-P101-M-SC-T
Industrial PoE Media Converter, multi mode, SC connector, -40 to 75°C
Prodotti Correlati
Certificati
Features and Benefits
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- IEEE 802.3af compliant PoE PSE equipment
- Power failure alarm by relay output
- Store-and-forward mode and pass through mode
- -40 to 75°C operating temperature range (T models)
- Redundant dual DC power inputs
Introduction
IMC-P101 series Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way provide up to 15.4 watts to IEEE 802.3af compliant powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
IEEE 802.3af for Power-over-Ethernet
Interface
RJ45 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port), PSE Indicator
DIP Switches:
Dip: 1
Function: Auto Negotiation
ON: Enable
OFF: Disable
Dip: 2
Function: Force TP Speed
ON: 100 Mbps
OFF: 10 Mbps
Dip: 3
Function: Force TP Duplex
ON: Full Duplex
OFF: Half Duplex
Dip: 4
Function: Link Fault Pass Through
ON: Enable
OFF: Disable
Dip: 5
Function: Operating Mode
ON: Store-and-Forward
OFF: Pass Through
Dip: 6
Function: PSE
ON: Disable
OFF: Enable
Dip: 7
Function: P.R.R. (PD Remote Reset)
ON: Enable
OFF: Disable
Alarm Contact: One relay output with current carrying capacity of 1 A @ 24 VDC
Optical Fiber
1000BaseFX:
Multi-mode:
Wavelength: 1300 nm
Max. TX: -14 dBm
Min. TX: -20 dBm
RX Sensitivity: -32 dBm
Link Budget: 12 dB
Typical Distance: 4-5 km
Saturation: -6 dBm
Single-mode:
Wavelength: 1310 nm
Max. TX: 0 dBm
Min. TX: -5 dBm
RX Sensitivity: -34 dBm
Link Budget: 29 dB
Typical Distance: 40 km
Saturation: -3 dBm
Physical Characteristics
Housing: Metal
Dimensions: 144.45 x 122.3 x 51.65 mm (5.69 x 4.81 x 2.03 in)
Weight: Product only: 525 g
Packaged: 710 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Power Requirements
Input Voltage: 48 VDC (46 to 57 VDC), redundant inputs
Power Consumption: 430 mA @ 48 VDC (max.)
Connection: Removable terminal block
Overload Current Protection: 1.6 A (protects against two signals shorted together)
Reverse Polarity Protection: Protects against V+/V- reversal
Standards and Certifications
Safety: UL 508
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS:
IEC 61000-4-2 (ESD) Level 4,
IEC 61000-4-3 (RS) Level 3,
IEC 61000-4-4 (EFT) Level 4,
IEC 61000-4-5 (Surge) Level 3,
IEC 61000-4-6 (CS) Level 3,
IEC 61000-4-8 (PFMF) Level 1,
IEC 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time: 435,210 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years