IMC-P101-S-SC-T MOXA ethernet to Fiber Converters

Features and Benefits

• 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
• IEEE 802.3af compliant PoE PSE equipment
• Power failure alarm by relay output
• Store-and-forward mode and pass through mode
• -40 to 75°C operating temperature range (T models)
• Redundant dual DC power inputs

Introduction

IMC-P101 series Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way provide up to 15.4 watts to IEEE 802.3af compliant powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.

Technology

Standards:
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X), 100BaseFX
     IEEE 802.3af for Power-over-Ethernet

Interface

RJ45 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port), PSE Indicator
DIP Switches:
     Dip: 1
     Function: Auto Negotiation
     ON: Enable
     OFF: Disable

     Dip: 2
     Function: Force TP Speed
     ON: 100 Mbps
     OFF: 10 Mbps

     Dip: 3
     Function: Force TP Duplex
     ON: Full Duplex
     OFF: Half Duplex

     Dip: 4
     Function: Link Fault Pass Through
     ON: Enable
     OFF: Disable

     Dip: 5
     Function: Operating Mode
     ON: Store-and-Forward
     OFF: Pass Through
     Dip: 6
     Function: PSE
     ON: Disable
     OFF: Enable
     Dip: 7
     Function: P.R.R. (PD Remote Reset)
     ON: Enable
     OFF: Disable
Alarm Contact: One relay output with current carrying capacity of 1 A @ 24 VDC

Optical Fiber

1000BaseFX:
     Multi-mode:
          Wavelength: 1300 nm
          Max. TX: -14 dBm
          Min. TX: -20 dBm
          RX Sensitivity: -32 dBm
          Link Budget: 12 dB
          Typical Distance: 4-5 km
          Saturation: -6 dBm

     Single-mode:
          Wavelength: 1310 nm
          Max. TX: 0 dBm
          Min. TX: -5 dBm
          RX Sensitivity: -34 dBm
          Link Budget: 29 dB
          Typical Distance: 40 km
          Saturation: -3 dBm

Physical Characteristics

Housing: Metal
Dimensions: 144.45 x 122.3 x 51.65 mm (5.69 x 4.81 x 2.03 in)
Weight: Product only: 525 g
Packaged: 710 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)

Environmental Limits

Operating Temperature: 
     Standard Models: 0 to 60°C (32 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Power Requirements

Input Voltage: 48 VDC (46 to 57 VDC), redundant inputs
Power Consumption: 430 mA @ 48 VDC (max.)
Connection: Removable terminal block
Overload Current Protection: 1.6 A (protects against two signals shorted together)
Reverse Polarity Protection: Protects against V+/V- reversal

Standards and Certifications

Safety: UL 508
EMC: CE, FCC
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS: 
     IEC 61000-4-2 (ESD) Level 4,
     IEC 61000-4-3 (RS) Level 3,
     IEC 61000-4-4 (EFT) Level 4,
     IEC 61000-4-5 (Surge) Level 3,
     IEC 61000-4-6 (CS) Level 3,
     IEC 61000-4-8 (PFMF) Level 1,
     IEC 61000-4-11
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE

MTBF (mean time between failures)

Time: 435,210 hrs
Database: Telcordia (Bellcore), GB

Warranty

Warranty Period: 5 years