ioLogik E2210 MOXA active ethernet io server

ioLogik E2210 MOXA

ioLogik E2210

Active Ethernet I/O Server, 24Vdc 12DI,8DO,Modbus/TCP,SNMP,Active I/O Messaging

Clicca per maggiori dettagli


Articoli Prezzo (IVA esc.)
1+ pz.€ 307,51

Prezzo di 1 pz. iva (22%) inclusa: € 375,16

Disponibilità: buona

Brand: MOXA

SKU: 64641

Model: ioLogik E2210

Prodotti Correlati


MX-AOPC UA Active Data Acquisition Software

1+ pezzi:  € 591,95   

Features and Benefits

  • Active communication with patented Active OPC Server
  • Smart Alarm management with email, SNMP Trap, TCP, UDP
  • Supports SNMPv1/v2c/v3 protocol
  • Save time and wiring costs with  peer-to-peer communication
  • Front-end intelligent with patented Click&Go control logic, up to 24 rules
  • Friendly configuration with web browser


Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time   stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.

Inputs and Outputs

Digital Inputs: 12 channels
Digital Outputs: 8 channels
Isolation: 3k VDC or 2k Vrms

Digital Input

Sensor Type: Wet Contact (NPN), Dry Contact
I/O Mode: DI or Event Counter
Dry Contact:
     On: short to GND
     Off: open
Wet Contact (DI to GND):
     On: 0 to 3 VDC
     Off: 10 to 30 VDC
Common Type: 12 points per COM
Counter Frequency: 900 Hz
Digital Filtering Time Interval: Software Configurable

Digital Output

Type: Sink
I/O Mode: DO or Pulse Output
Pulse Output Frequency: 1 kHz
Over-voltage Protection: 45 VDC
Over-current Protection: 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown: 175°C (min.)
Current Rating: 200 mA per channel

Power Requirements

Power Consumption: 203 mA @ 24 VDC

MTBF (mean time between failures)

Time: 213,673 hrs
Database: Telcordia (Bellcore)


Ethernet: 1 10/100 Mbps RJ45 port
Protection: 1.5 kV magnetic isolation

Serial Communication

Interface: RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection: 15 kV ESD for all signals

Serial Communication Parameters

Parity: None
Data Bits: 8
Stop Bits: 1
Flow Control: None
Baudrate: 1200 to 115200 bps
Protocol: Modbus/RTU

Power Requirements

Power Input: 24 VDC nominal, 12 to 36 VDC

Physical Characteristics

Wiring: I/O cable max. 14 AWG
Dimensions: 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight: under 250 g
Mounting: DIN rail or wall

Environmental Limits

Operating Temperature:
     Standard Models: -10 to 60°C (14 to 140°F)
     Wide Temp. Models: -40 to 75°C (-40 to 167°F)
     Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL 508
EMI: EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC Part 15, Subpart B, Class A
     EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
     EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
     EN 61000-4-11, EN 61000-6-2
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Green Product: RoHS, CRoHS, WEEE


Warranty Period: 5 years (excluding ioLogik E2214*)
*Note: Because of the limited lifetime of power relays, products that use that component are covered by a 2-year warranty.

Le immagini e le caratteristiche dei prodotti presenti sul sito sono di proprietà di MOXA Inc. E' espressamente vietata la riproduzione dei contenuti del sito in qualsiasi modo ed a qualsiasi scopo senza la preventiva autorizzazione scritta da parte di Lastella Trade o MOXA Inc. Le immagini presenti sono a puro titolo esplicativo, in alcuni casi sono foto di gruppo e potrebbero subire variazioni senza preavviso, per le caratteristiche del prodotto fa fede la descrizione prodotto.

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Advantech
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter