LRP-101CE Planet POE Injectors Splitter Extender

 PLANET Technology Long Reach PoE Solution enables all enterprises and network service providers to set up an IP infrastructure in a remote location where 802.3af/at PoE compliant powered devices can receive both data and power via PLANET switches, and PLANET LRP extenders and injectors over a long distance but not limited to the normal 100 meters.

Data and Power Transmitted over Long Distance

PLANET LRP-101CE, a PLANET Long Reach PoE solution, is a single-port 802.3at PoE+ Extender that is installed at a remote location connecting to an PoE IP camera or PoE wireless AP. The LRP-101CE has to work with PLANET single-port Long Reach PoE Injector or Multiple-channel Long Reach PoE Switch to be able to simultaneously transmit both data and power to a PD over a distance of up to 1,000m (3,280ft) over coaxial cable. The LRP-101CE provides a maximum of 25-watt power output over Ethernet cable to a remote PoE IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE.

Specifications

Hardware Specifications

Ethernet Interface:
■ Copper:
• 10/100BASE-TX RJ45
• auto-negotiation/ auto-MDI/MDI-X
■ Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment)
■ PoE Output: 56V DC, 600mA max.
■ PoE Budget: Up to 25 watts
■ PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-)
■ Data Rate: 100/100Mbps
■ Cabling: Cat5e or above
■ Maximum Distance: 100 meters
■ Maximum Frame Size: 1522bytes
 
Long Reach PoE Interface:
■ Connectivity:
• 1 x BNC female
• Long Reach PoE over coaxial PD (Powered Device)
■ Power Input: 37~56V DC*
■ Power Pin Assignment:
• BNC center pole: DC+ / Hi
• BNC shield: DC - / Lo
■ Cabling:
• Coaxial cable: 75 ohm
• RG-6/U cable, less than 12Ω/1,000ft.
• RG-59/U cable, less than 30Ω/1,000ft.
■ Maximum Distance:
• Max. 200m with PoE+ output (656ft.)
• Max. 600m with PoE output (1,968ft.)
• Max. 1,200m without PoE output (3,937ft.)
■ Long Reach Ethernet Standard: IEEE 1901
■ Modulation Type: Wavelet-OFDM
■ Security: 128-bit AES encryption
■ Frequency Band: 2 ~ 28 MHz
■ Encryption: AES 128-bit
■ Multiple Nodes: Supports up to 4 LRP extenders within 1km
■ LRP Compatibility:
With power over coaxial input
• LRP-101CH – 1-Port LRP Injector
• LRP-822CS – 8-Port LRP over Coax Switch
• LRP-1622CS – 16-Port LRP over Coax Switch
LED Indicators: 4 x LEDs
■ PWR
■ LRP LNK
■ PoE-in-use
■ LNK/ACT
ESD Protection: 4KV DC
Enclosure: Metal case
Installation: Wall mount or DIN rail with optional kit
Dimensions (W x D x H): 94 x 70 x 26 mm
Weight: 375g
Power Requirements: BNC Power over Coaxial Input: 44~56V DC

Standards Conformance

Standards Compliance: IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
Regulation Compliance: FCC Part 15 Class A, CE

Environment

Temperature: Operating: -20~70 degrees C
Storage: -40~75 degrees C
Humidity: Operating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)