MC201-F(S), CAN to fiber converter,CAN 2KVAC isolation, 8KV ESD, single mode, SC/ST/FC, 15Km, 5VDC
MC201-F(S)
CAN to fiber converter,CAN 2KVAC isolation, 8KV ESD, single mode, SC/ST/FC, 15Km, 5VDC
SPEDIZIONE GRATUITA
Bisogno di aiuto?
Introduction
MC201-F is a CAN bus signal to optical signal converter. It’s specially designed for solving problems like short transmission distance and electromagnetic interference during CAN bus transmission. It supports 1 CAN port to 1 fiber port transparent transmission and adopts wall mounting which can meet the requirements of different scenes.
DIP switch could implement baud rate setting of CAN port. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.
Features
- Support 1 CAN port to 1 fiber port
- CAN port supports two options for choosing baud rate, automatic detection and user definition. The range of baud rate is 2.5kbps-1000kbps
- Data receiving/storing/forwarding could be achieved between 2 CAN networks with different rates when used in pairs
- It can extend CAN bus transmission distance, the transmission distance of fiber port can reach up to 15km
- Support -40～75℃ wide operating temperature range
Specifications
Fiber Port
Interface form：SC/ST/FC
Transmission distance：15km
Optical cable：8.3/125μm、8.7/125μm、9/125μm or 10/125μm
Transmission wavelength：1310nm or 1550nm
CAN Interface
Standard: CAN2.0A, CAN2.0B
CAN signal: CANH, CANL, GND
Duplex mode: 2-wire Half Duplex Mode
Baud rate: 2.5kbps-1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: adopt 5-pin 5.08mm pitch terminal blocks
Terminating resistor: optional external 120Ω terminating resistor
Interface protection: 2kVAC isolation protection
LED Indicator
Power supply indicator, fiber port/data indicator, CAN port indicator
Power Requirement
5VDC，DC round head
Power Consumption
No-load: 1.39W@5VDC
Full-load: 1.31W@5VDC
Environmental Limit
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%～95%(no condensation)
Physical Characteristic
Housing: IP40 protection, metal
Installation: wall mounting
Dimension (W x H x D): 69mm×22mm×100mm
Weight: 237g
Industrial Standard
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ±8kV
Contact discharge: ±6kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification
CE, FCC, RoHS
Warranty
3 years