MGate 5111-T MOXA Modbus Gateways

MGate 5111-T MOXA

MGate 5111-T

Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateway, -40 to 75°C operating temperature

Clicca per maggiori dettagli


Prezzo per pezzo

€ 747,99

(IVA esclusa)

€ 912,55(IVA inclusa)

Articoli Prezzo (IVA esc.)
1+ pz.€ 747,99
3+ pz.€ 725,55
5+ pz.€ 710,59

Prezzo di 1 pz. iva (22%) inclusa: € 912,55

Disponibilità: 10 gg lav

Brand: MOXA

SKU: 110227

Model: MGate 5111-T

Prodotti Correlati



Prezzo:  € 14,55   



Prezzo:  € 9,95   



Prezzo:  € 9,95   



Prezzo:  € 7,66   


mini DB9F-to-TB

Prezzo:  € 9,80   



Prezzo:  € 14,88   


MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.
Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in factory automation and process automation. The MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs.

Features and Benefits

  •  Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
  •  Supports PROFIBUS DP V0 slave
  •  Supports Modbus RTU/ASCII/TCP master/client and slave/server
  •  Supports EtherNet/IP Adapter
  •  Supports PROFINET IO device
  •  Effortless configuration via web-based wizard
  •  Built-in Ethernet cascading for easy wiring
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting
  •  Status monitoring and fault protection for easy maintenance
  •  microSD card for configuration backup/duplication and event logs
  •  Supports redundant dual DC power inputs and 1 relay output
  •  Serial port with 2 kV isolation protection
  •  -40 to 75°C wide operating temperature models available
  •  Security features based on IEC 62443


Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector): 
 Auto MDI/MDI-X connection
Magnetic Isolation Protection: 1.5 kV (built-in)

Ethernet Software Features

Industrial Protocols: Modbus TCP Client (Master), Modbus TCP Server (Slave), PROFINET IO Device, EtherNet/IP Adapter
Configuration Options: Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
Management: ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIB: RFC1213, RFC1317
Time Management: NTP Client

Serial Interface

Console Port: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports: 1
Connector: DB9 male
Serial Standards: RS-232/422/485
Baudrate: 50 bps to 921.6 kbps
Data Bits: 7, 8
Parity: None, Even, Odd, Space, Mark
Stop Bits: 1, 2
Flow Control: RTS Toggle (RS-232 onl: y), RTS/CTS
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485: 120 ohms
Isolation: 2 kV (built-in)

Serial Signals

RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

Configuration Options: Serial Console
Industrial Protocols: PROFIBUS DP-V0 Slave, Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave


Mode: Master, Slave
Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands: 128
Input Data Size: 2048 bytes
Output Data Size: 2048 bytes

Modbus TCP

Mode: Client (Master), Server (Slave)
Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Client Connections: 16
Max. No. of Server Connections: 32
Max. No. of Commands: 128
Input Data Size: 2048 bytes
Output Data Size: 2048 bytes

PROFIBUS Interface

Industrial Protocols: PROFIBUS DP
No. of Ports: 1
Connector: DB9 female
Baudrate: 9600 bps to 12 Mbps
Isolation: 2 kV (built-in)
Signals: PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V


Rotary Switch: PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration)
Mode: DP-V0 Slave
Max. No. of Master Connections: 1
Max. No. of PROFIBUS I/O Modules: 24
Input Data Size: 244 bytes
Output Data Size: 244 bytes


Mode: IO Device
Max. No. of IO Controller Connections: 1 (for read/write)Input Data Size: 512 bytes
Output Data Size: 512 bytes


Mode: Adapter
CIP Objects Supported: Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
Max. No. of Scanner Connections: 1 (for read-only), 1 (for read/write)
Input Data Size: 496 bytes
Output Data Size: 496 bytes


microSD Slot: Up to 32 GB (SD 2.0 compatible)

Power Parameters

Input Voltage: 12 to 48 VDC
Input Current: 416 mA @ 12 VDC
Power Connector: Spring-type Euroblock terminal


Contact Current Rating: Resistive load: 2 A @ 30 VDC

Physical Characteristics

Housing: Metal
IP Rating: IP30
Dimensions: 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Weight: 589 g (1.30 lb)

Environmental Limits

Operating Temperature:  -40 to 75°C (-40 to 167°F)
Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications

Safety: EN 60950-1, UL 61010-2-201
EMC: EN 61000-6-2/-6-4
EMI: CISPR 32, FCC Part 15B Class A
 IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
 IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
 IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
 IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
 IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
 IEC 61000-4-8 PFMF
Hazardous Locations: ATEX, Class I Division 2, IECEx
Freefall: IEC 60068-2-32
Shock: IEC 60068-2-27
Vibration: IEC 60068-2-6, IEC 60068-2-64


Time: 718,131 hrs
Standards: Telcordia SR332


Warranty Period:  5 years