MiiNePort E3-H-ST MOXA embedded device servers

MiiNePort E3-H-ST MOXA

MiiNePort E3-H-ST

Starter kit for the MiiNePort E3-H series, module included

Clicca per maggiori dettagli

Q.tà':

Articoli Prezzo (IVA esc.)
1+ pz.€ 161,36
3+ pz.€ 158,13

Prezzo di 1 pz. iva (22%) inclusa: € 196,86

Disponibilità: 10 gg lav

  >> I tempi protrebbero essere piĆ¹ lunghi da quelli indicati <<

Brand: MOXA

SKU: 91911

Model: MiiNePort E3-H-ST

Features and Benefits

  • IEEE 802.3af compliant PoE pass-through
  • Use Moxa’s high quality and reliable second generation MiiNe SoC
  • Versatile choice of operation modes fulfill specific application requirements
  • Green design with extremely low power consumption
  • MiiNePort NetEZ Technology makes integration incredibly easy
  • Highly compact embedded device module
  • Support IPv6

Introduction

Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.

The MiiNe—Moxa’s 2nd Generation SoC

The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a compact embedded device server that has the lowest power consumption of similar products. The MiiNe has the following features:

  • Designed for serial-to-Ethernet applications
  • Uses an ARM core
  • Uses Moxa’s own advanced UART technology
  • 2 MB Flash and 4 MB SDRAM memory built in

Form Factor

Type: Pin header module
Dimensions: 35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in)
Weight: 12 g

System Information

CPU: 32-bit ARM Core
RAM: 4 MB built in
Flash: 2 MB built in

Ethernet Interface

Number of Ports: 1
Speed: 10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection: 1.5 kV built-in
Connector: RJ45 (magnetic)
LEDs: 10BASE-T & 100BASE-TX Link Activity
PoE Pass-through: 802.3af compliant

Serial Interface

Number of Ports: 1
Transmission Format: Standard TTL

Serial Communication Parameters

Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Baudrate (non-standard baudrates supported):
     MiiNePort E3: 50 bps to 230.4 kbps
     MiiNePort E3-H: 50 bps to 921.6 kbps

Serial Signals

TTL: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND

Digital I/O Pins

GPIO: 4 configurable I/O pins

Software

Network Protocols: ICMP, ARP, IPv4/v6, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options: Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x
Operation Modes: Real COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217
NetEZ function: EZPower, EZPage, SCM (Serial Command Mode), AutoCFG

Environmental Limits

Operating Temperature:
     Standard Models: 0 to 55°C (32 to 131°F)
     Wide Temp. Models: -40 to 85°C (-40 to 185°F)
     Storage Temperature (package included): -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Altitude: Up to 2000 m

Power Requirements

Input Voltage: 3.3 to 5 VDC (±5%)
Power Consumption: 157 mA @ 3.3 VDC, 119 mA @ 5 VDC input max.

Standards and Certifications

EMI: EN 55022 Class B, EN 61000-3-2, EN 61000-3-3
EMS:
     EN 55024,
     EN 61000-4-2 (ESD),
     EN 61000-4-3 (RS),
     EN 61000-4-4 (EFT),
     EN 61000-4-5 (Surge),
     EN 61000-4-6 (CS),
     EN 61000-4-8,
     EN 61000-4-11
Shock: IEC-68-2-27
Vibration: IEC-68-2-6

Reliability

MTBF (mean time between failures): 3,608,031 hrs

Warranty

Warranty Period: 5 years

Le immagini e le caratteristiche dei prodotti presenti sul sito sono di proprietà di MOXA Inc. E' espressamente vietata la riproduzione dei contenuti del sito in qualsiasi modo ed a qualsiasi scopo senza la preventiva autorizzazione scritta da parte di Lastella Trade o MOXA Inc. Le immagini presenti sono a puro titolo esplicativo, in alcuni casi sono foto di gruppo e potrebbero subire variazioni senza preavviso, per le caratteristiche del prodotto fa fede la descrizione prodotto.





Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Advantech
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter