TN-5510A-2GLSX-ODC-WV-T MOXA EN 50155 POE Managed Switches

Features and Benefits

• Provides up to 30 watts per PoE port with a total power budget of 120 watts per switch
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• Leading EN 50155-compliant Gigabit Ethernet switches for rolling stock applications
• DHCP Option 82 for IP address assignment with different policies
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic
• EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
• QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic classification and prioritization
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• SNMPv1/v2c/v3 for different levels of network management
• TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
• RMON for efficient network monitoring and proactive capability
• Bandwidth management prevents unpredictable network status
• Lock port allows access by only authorized MAC addresses
• Port mirroring for online debugging
• Automatic warning by exception through email, relay output
• Line-swap fast recovery
• LLDP for automatic topology discovery in network management software
• Configurable by web browser, Telnet/serial console, CLI, and
• Windows utility
• Loop protection prevents network loops
• Panel mounting or DIN-rail mounting installation capability
• 2 Gigabit fiber ports with embedded multi-mode Q-ODC® interface
• Isolated power inputs with wide 24 to 110 VDC power supply range
• Essential compliance with EN 50155
• -40 to 75°C operating temperature range
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
• switches), and STP/RSTP/MSTP for network redundancy
• 8 IEEE 802.3at/af compliant combo PoE and Ethernet ports
• Provides up to 30 watts per PoE port

Introduction

The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX-ODC series M12 managed Ethernet switches are designed for railway applications, such as rolling stock and wayside installations. The TN series switches use M12 and other circular connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the 24 to 110 VDC wide power input range and isolated power inputs not only allow you to use the same type of power source at different sites around the globe, but also increase the reliability of your communications system. The TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX-ODC switches provide up to 8 Fast Ethernet M12 ports, and 2 ports on the down side to provide the Gigabit fiber interface with an embedded 2-km multimode fiber transceiver. The TN-5510A-8PoE-2GLSX-ODC series Ethernet switches have 8 Fast Ethernet M12 ports with 8 IEEE 802.3at/af compliant PoE (Power-over-Ethernet) ports. The PoE switches are classified as power source equipment (PSE); they provide up to 30 watts of power per port, and can be used to power IEEE 802.3at/af compliant powered devices (PDs), such as IP cameras, wireless access points, and IP phones. Moreover, the -40 to 75°C operating temperature and IP54-rated waterproof enclosure allow deployment in harsh environments. The TN-5500A series Ethernet switches are compliant with essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of industrial applications.

Technology

Standards: 
     IEEE 802.3 for 10BaseT
     IEEE 802.3u for 100BaseT(X)
     IEEE 802.3ab for 1000BaseT(X)
     IEEE 802.3x for Flow Control
     IEEE 802.1D-2004 for Spanning Tree Protocol
     IEEE 802.1w for Rapid Spanning Tree Protocol
     IEEE 802.1s for Multiple Spanning Tree Protocol
     IEEE 802.1Q for VLAN Tagging
     IEEE 802.1p for Class of Service
     IEEE 802.1X for Authentication
     IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, SNMP Inform, LLDP, IEEE 1588 PTP v2, IPv6, NTP Server/Client, EtherNet/IP, Modbus/TCP
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE802.3x flow control, back pressure flow control

Switch Properties

Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256

Interface

Fast Ethernet: Front cabling, M12 D-coded 4-pin female connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Gigabit Ethernet: Down cabling, Q-ODC® connector, 1000M (Gigabit Ethernet port), PoE (for PoE models)
Console Port: M12 A-coding 5-pin male connector
System LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators: 10/100M (Fast Ethernet port), 1000M (Gigabit Ethernet port)
Alarm Contact: 2 relay outputs in one M12 A-coding 5-pin male
connector with current carrying capacity of 1 A @ 30 VDC

Power Requirements

Overload Current Protection: Yes
Connection: M23 connector
Reverse Polarity Protection: Yes
Input Voltage: WV: 24 to 110 VDC (16.8 to 137.5 VDC)
Max. Input Current: 
     TN-5510A-2GLSX-ODC series: 0.45 A @ 24 VDC; 0.1 A @ 110 VDC 
     TN-5510A-8PoE-2GLSX-ODC series: TBD @ 24 VDC; TBD @110 VDC

Physical Characteristics

Housing: Aluminium alloy, IP54 protection (optional protective caps available for unused ports)
Dimensions: 
     TN-5510A-2GLSX-ODC series: 185 x 204.3 x 76.0 mm (7.28 x 8.04 x 2.99 in)
     TN-5510A-8PoE-2GLSX-ODC series:185 x 219.3 x 115 mm (7.28 x 8.63 x 4.53 in)
Weight: 
     TN-5510A-2GLSX-ODC series: 1,805 g 
     TN-5510A-8PoE-2GLSX-ODC series: 2,690 g
Installation: Panel mounting, DIN-rail mounting (with optional kit: DK-DC50131)

Environmental Limits

Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Vibration: IEC 60068-2-6, 2-17.8 Hz: ±1.6 mm; 17.8-500 Hz: 2 g; 2 hours/axis
Shock: IEC 60068-2-27, 20 g / 11 ms
Ingress Protection: IEC 60529, IP54
Altitude: Up to 2000 m

Standards and Certifications

Safety: UL/cUL 508, EN 60950-1 (LVD)
EMC: EN 55022, EN 55024
EMI: CISPR 22, FCC Part 15B Class A
EMS: 
     IEC 61000-4-2 ESD: Contact 6 kV; Air 8 kV
     IEC 61000-4-3 RS: 20 V/m (80 MHz to 1 GHz) 
     IEC 61000-4-4 EFT: Power 2 kV; Signal 2 kV 
     IEC 61000-4-5 Surge: Power 2 kV; Signal 2 kV 
     IEC 61000-4-6 CS: 10 V 
     IEC 61000-4-8
Rail Traffic (for panel mounting installations): EN 50155, EN 50121-4, EN 50121-3-2, EN 45545-2
Shock: IEC 61373
Freefall: IEC 60068-2-32
Vibration: EN 50155, IEC 61373

MTBF

Time: 
     TN-5510A-2GLSX-ODC series: 722,049 hrs 
     TN-5510A-8PoE-2GLSX-ODC series: TBD
Standard: Telcordia SR332, GB, 25°C

Warranty

Warranty Period: 5 years