VC-234G
4-Port 10/100/1000T Ethernet to VDSL2 Bridge -- 30a profile w/G.vectoring, RJ11
Bisogno di aiuto?
High Performance Gigabit Ethernet over Phone Wire Solution
PLANET VC-234G, a new-generation and high-performance Gigabit Ethernet-over-VDSL2 Converter, works well with a pervasive telephone line network with a symmetric (downstream/upstream) data rate of up to 150/150Mbps (G.INP, Sym, 8dB) over a distance of 300m and 20/12Mbps over a long distance of 1.4km. It is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely the fastest data transmission speed over the existing copper telephone lines without the need of rewiring.
With integrated support for the ITU-T’s new G.993.5 vectoring technology, the VC-234G works in conjunction with vectoring-enabled DSLAMs to remove crosstalk interference and improve maximum line bandwidth across the existing copper telephone infrastructure.
Specifications
Hardware Specifications
LAN Ports: 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
VDSL Port: 1 VDSL2 RJ11 female phone jack
Twisted-pair telephone wires (AWG24 or better) up to 1.4km
Phone Port: 1 RJ11, built-in splitter for POTS connection
Dimensions (W x D x H): 154.6 x 86.0 x 26.3 mm
Weight: 350g
Power Requirements: 5V DC, 2A external power
LED Indicators: 1 power: Green
4 1000BASE-T LNK/ACT: Green
4 100BASE-TX LNK/ACK: Green
1 VDSL: Green
1 CO: Green
1 CPE: Green
Housing: Metal
DIP Switch & Functionality: 4-position DIP switch
CO/CPE mode select
Selectable G.INP and interleaved mode
Selectable target Band plan
Selectable target SNR mode
Switch Specifications
Switch Processing Scheme: Store-and-Forward
Address Table: 2K entries
Flow Control: Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Packet Size: 9K bytes
System Specifications
VDSL Compliance: VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.vectoring
ITU-T G.998
G.INP
ADSL Compliance: Capable of ADSL2/2+ standard
ITU G.992.3 G.dmt.bis
ITU G.992.5 G.dmt.bisplus
Data Rate: Up to 24Mbps
Performance*<br>(Downstream/Upstream): Interleave, Asym, 8dB
200M ----> 193Mbps/89Mbps
400M ----> 164Mbps/69Mbps
600M ----> 112Mbps/39Mbps
800M ----> 70Mbps/14Mbps
1000M --> 46Mbps/7Mbps
1400M --> 21Mbps/4Mbps
Interleave, Sym, 8dB
200M ----> 142Mbps/139Mbps
400M ----> 116Mbps/118Mbps
600M ----> 70Mbps/73Mbps
800M ----> 50Mbps/40Mbps
1000M --> 24Mbps/24Mbps
1400M --> 10Mbps/6Mbps
G.INP, Asym, 8dB
200M ----> 200Mbps/100Mbps
400M ----> 170Mbps/68Mbps
600M ---->113Mbps/37Mbps
800M ----> 70Mbps/18Mbps
1000M --> 51Mbps/7Mbps
1400M --> 24Mbps/2Mbps
G.INP, Sym, 8dB
200M ----> 150Mbps/150Mbps
400M ----> 120Mbps/126Mbps
600M ----> 73Mbps/78Mbps
800M ----> 48Mbps/43Mbps
1000M --> 27Mbps/26Mbps
1400M --> 10Mbps/5Mbps
Interleave, Asym, 12dB
200M ----> 180Mbps/80Mbps
400M ----> 145Mbps/57Mbps
600M ----> 95Mbps/32Mbps
800M ----> 60Mbps/13Mbps
1000M --> 39Mbps/6Mbps
1400M --> 18Mbps/2Mbps
Interleave, Sym, 12dB
200M ----> 137Mbps/129Mbps
400M ----> 99Mbps/102Mbps
600M ----> 54Mbps/61Mbps
800M ----> 41Mbps/35Mbps
1000M --> 22Mbps/19Mbps
1400M --> 7Mbps/3Mbps
G.INP, Asym, 12dB
200M ----> 185Mbps/90Mbps
400M ----> 150Mbps/60Mbps
600M ----> 94Mbps/36Mbps
800M ----> 61Mbps/14Mbps
1000M --> 44Mbps/6Mbps
1400M --> 21Mbps/1Mbps
G.INP, Sym, 12dB
200M ----> 142Mbps/136Mbps
400M ----> 103Mbps/110Mbps
600M ----> 57Mbps/65Mbps
800M ----> 38Mbps/36Mbps
1000M --> 14Mbps/13Mbps
1400M --> 8Mbps/3Mbps
*Note: As there are various resistance values in the category of RJ11 cable, the actual data rate will vary on the quality of the copper wire and environmental factors.
Standards Conformance
Standards Compliance: IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow control
IEEE 802.1p Class of Service
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a support)
ITU-T G.993.5 G.Vectoring & G.INP
ITU-T G.998