WDR-120-24 Mean Well Alimentatori Guida DIN

Features

• Single and two phase wide input range 180 ~ 550Vac
• Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• Built-in constant current limiting circuit
• Can be installed on DIN rail TS-35/7.5 or 15
• UL508(Industrial control equipment)approved
• EN61000-62(EN50082-2)industrial immunity level
• 100% full load burn-in test
• Built-in DC OK relay contact
• 3 years warranty

Specifications

OUTPUT

DC VOLTAGE: 24V
RATED CURRENT: 5A
CURRENT RANGE: 0 ~ 5A
RATED POWER: 120W
RIPPLE & NOISE (max.): 120mVp-p
VOLTAGE ADJUSTMENT RANGE: 24 ~ 29V
VOLTAGE TOLERANCE: ±1.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±0.5%
SETUP, RISE, HOLD UP TIME: 2000ms, 70ms, 50ms/400Vac            2000ms, 70ms, 10ms/230Vac at full load

INPUT

VOLTAGE RANGE: 180 ~ 550VAC
FREQUENCY RANGE: 47 ~ 63Hz
EFFICIENCY (Typ.): 91% / 400V
AC CURRENT: 0.7A/400VAC          1.2A/230VAC
INRUSH CURRENT (max.): COLD START 50A
LEAKAGE CURRENT: <3.5mA / 530Vac

PROTECTION

OVERLOAD: 105 ~ 130% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
 
OVER VOLTAGE: 31 ~ 37V  
Protection type: Shut down o/p voltage, re-power on to recover
 
OVER TEMPERATURE: Protection type: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

DC OK SIGNAL: Relay contact rating(max.): 30V / 1A resistive

ENVIRONMENT

WORKING TEMP.: -25 ~ +70°C (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85°C, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 50°C)
VIBRATION: Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6

SAFETY & EMC

SAFETY STANDARDS: UL508, EAC TP TC 004 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet  EN60204-1) 
WITHSTAND VOLTAGE: I/P-O/P:3KVAC     I/P-FG:2KVAC     O/P-FG:0.5KVAC     O/P-DC OK:0.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to EN55011 (CISPR11), EN55032 (CISPR32), EN61204-3 Class B, EAC TP TC 020
EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A, EAC TP TC 020
 
MTBF: 268K hrs min.      MIL-HDBK-217F (25℃)
DIMENSIONS: (WxHxD) 40 x 125.2 x 113.5 mm