BB-232OPDR ADVANTECH Serial Repeaters

 FEATURES

• Extend RS-232 data another 15.2 m (50 ft.)
• 2,000V optically isolated data lines
• -40 to +80°C operating temperature
• Terminal block connections
• UL Recognized
• NEMA TS2

Introduction

The 232OPDR is a DIN rail mountable RS-232 optical isolator and repeater.
It provides 2,000 V isolation for four RS-232 signal lines (two in each
direction). The isolator has four LED’s to show data flow and one LED to
indicate power. Connections are made to a terminal block. The isolation
provides protection for computer equipment from ground loops and induced
currents caused by lightning or heavy electrical loads. It also functions
as a repeater to extend RS-232 signals another 15.2 meters (50 ft.). The
232OPDR can support two data pairs or one data pair plus control signals in
both directions.

SPECIFICATIONS

RS-232

Connector: Terminal Block
Signals: 4 signal lines in each direction. Protected ground on isolated side.

ISOLATION

Method: Optical
Rating: 2,000 V

POWER

Connector: Terminal block
Voltage: 10 to 30 VDC
Power Consumption: 1.2 W
Source: External

TERMINAL BLOCKS

Wire Size: 24 to 14 AWG
Torque: 4 kgf-cm

LED INDICATORS

DATA LEDs (RED): Data LED for each side of isolator Flashes when data transmitted
Power LED (RED): ON when power applied 

ENCLOSURE

Material: Plastic
IP Rating: 30
Dimensions: 2.5 x 7.9 x 9.5 cm (1.0 x 3.1 x 3.7 in)
Mounting: 35 mm DIN (panel mount adapter available)

ENVIRONMENTAL

Operating Temperature: -40 to 80 °C (-40 to 176 °F)
Storage Temperature: -40 to 85 °C (-40 to 185 °F)
Operating Humidity: 0 to 95% Non-condensing
MTBF: 244689 hours
MTBF Calculation Method: MIL217F Parts Count Reliability
 
REGULATORY
Approvals: CE, FCC, NEMA TS2
cULus Recognized, File E222870