Moxa NPort 5110 Server di dispositivi seriali porta RS232

NPort 5110 MOXA

NPort 5110

Serial device server, 1 port RS232, 10/100M Ethernet, DB9 male, 15KV ESD, 9-30VDC With adapter 220/110 V to 12V

Quantità':

Prezzo per pezzo

-35% € 119,60

 184,00

(IVA esclusa)

€ 145,91 (IVA inclusa)

Prezzo di 1 pz. iva (22%) inclusa: € 224,48

Disponibilità: ottima

Brand: MOXA

SKU: 64499

Model: NPort 5110

Line: Server seriale - convertitore seriale ethernet RS232

Bisogno di aiuto?


Prodotti Correlati

Planet

ICS-2100T

Prezzo:  € 130,74   

OEM

XT-DC015

Prezzo:  € 2,00   

OEM

XT-DC016

Prezzo:  € 2,00   

OEM

XT-JK5.5

Prezzo:  € 1,00   

MOXA

DK35A

Prezzo:  € 3,92   

3ONEDATA

NP301

Prezzo:  € 69,36   

Certificati

CE Certificato
FCC Certificato
UL Certificato
RoHS Certificato

NPort 5100 series device servers are designed to make serial devices network-ready in an instant.
The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.
Use the NPort 5100 series device servers to give your PC software direct access to serial devices from anywhere on the network.
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost effective and to provide a broad selection of useful functions.
With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort Moxa 5110 provides the best choice for rs232 serial to Ethernet converter.
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals.
When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted.
Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port.
The NPort® 5100 device servers can be configured for TCP Server,TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports.
Installation and configuration is painless, and allows your serial devices and PC to communicate seamlessly over a TCP/IP network.
Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment, while still allowing you to enjoy the benefits of networking your serial devices.
NPort 5110 device server supports SNMP, which can be used to monitor all units over Ethernet.
Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered.
For users who do not use SNMP manager, an e-mail alert can be sent instead.
Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console.
For example, alerts can be triggered by a warm start, a cold start, or a change in password.

  • Small size for easy installation
  • Real COM/TTY drivers for Windows and Linux
  • Standard TCP/IP interface and versatile operation modes
  • Easy-to-use Windows utility for configuring multiple device servers
  • Built-in 15 kV ESD protection for all serial signals
  • SNMP MIB-II for network management
  • Configure by Telnet, web browser, or Windows utility
  • Adjustable pull high/low resistor for RS-485 ports
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Serial Interface
Number of Ports 1
Serial Standards RS232
NPort 5110 Connector DB9 male
Serial Line Protection 15 kV ESD protection for all signals
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate 110 bps to 230.4 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
NPort 5110 Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP
Configuration Options Web Console, Serial Console (NPort 5110/5150 only), Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x
Physical Characteristics
Housing Metal
Weight 340 g
Dimensions Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in) With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -20 to 75°C (-4 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption: 128.7 mA @ 12 V, 72 mA @ 24 V
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 279,122 hrs
Warranty
Warranty Period 5 years
Disclaimer

Sei interessato a un Preventivo ?

Hai una azienda e sei interessato ad un grosso acquisto di merce?
Contattaci per avere una offerta Personalizzata

Clicca qui

I Nostri Marchi

Distribuiamo Moxa
Distribuiamo Takachi
Distribuiamo Planet
Distribuiamo Patlite
Distribuiamo Teltonika
Distribuiamo Digitus
Distribuiamo Mean Well
Distribuiamo 3onedata
Distribuiamo Sirio Antenne

Resta collegato... iscriviti alla Newsletter

Visita anche il nostro portale icpdas.store

© 2020. Lastella Trade

site by www.davidesantandrea.it & Lastella Trade