The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments. The Wireless add-on for the MXview network management utility visualizes the AWK's invisible wireless connections to ensure wall-to-wall Wi-Fi connectivity.
Advanced 802.11n Industrial Wireless Solution
802.11a/b/g/n compliant AP/bridge/client for flexible deployment.
Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5 GHz).
Supports 60 clients connected concurrently.
DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure.
Advanced Wireless Technology
AeroMag supports error-free setup of your industrial applications fundamental WLAN settings.
Seamless roaming with client-based Turbo Roaming for < 150 ms roaming recovery time between APs (Client Mode).
Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients.
Industrial Ruggedness
Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference.
Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications.
-40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments.
Wireless Network Management With MXview Wireless
Dynamic topology view shows the status of wireless links and connection changes at a glance.
Visual, interactive roaming playback function to review the roaming history of clients.
Detailed device information and performance indicator charts for individual AP and client devices
- IEEE 802.11a/b/g/n AP/bridge/client support
- Easy setup and deployment with AeroMag
- Millisecond-level Client-based Turbo Roaming
- Complete redundancy with AeroLink Protection
- Easy network setup with Network Address Translation (NAT)
- Integrated antenna and power isolation
- -40 to 75°C wide operating temperature range (-T models)
- 5 GHz DFS channel support
Ethernet Interface| Standards | IEEE 802.3 for 10BaseT | IEEE 802.3u for 100BaseT(X) | IEEE 802.3ab for 1000BaseT(X) | IEEE 802.3at for PoE | IEEE 802.1Q for VLAN Tagging | IEEE 802.1X for authentication | IEEE 802.1D-2004 for Spanning Tree Protocol | IEEE 802.1w for Rapid Spanning Tree Protocol |
|---|
| PoE Ports (10/100/1000BaseT(X), RJ45 connector) | 1 |
|---|
Ethernet Software Features| Management | DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig |
|---|
| Routing | Port forwarding, Static Route, NAT |
|---|
| Redundancy Protocols | RSTP, STP |
|---|
| Security | HTTPS/SSL, RADIUS, SSH |
|---|
| Time Management | SNTP Client |
|---|
Firewall| Filter | ICMP, MAC address, IP protocol, Port-based |
|---|
Serial Interface| Console Port | RS-232, 8-pin RJ45 |
|---|
LED Interface| LED Indicators | PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN |
|---|
Input/Output Interface| Digital Inputs | 2 | Max. input current: 8 mA | +13 to +30 V for state 1 | +3 to -30 V for state 0 |
|---|
| Alarm Contact Channels | Relay output with current carrying capacity of 1 A @ 24 VDC |
|---|
| Buttons | Reset button |
|---|
Physical Characteristics| Housing | Metal |
|---|
| IP Rating | IP30 |
|---|
| Dimensions | 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in) |
|---|
| Weight | 860 g (1.9 lb) |
|---|
| Installation | DIN-rail mounting, Wall mounting (with optional kit) |
|---|
Power Parameters| Input Current | 0.6 A @ 12 VDC, 0.15 A @ 48 VDC |
|---|
| Input Voltage | 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet |
|---|
| Power Connector | 1 removable 10-contact terminal block(s) |
|---|
| Power Consumption | 7.2 W (max.) |
|---|
| Reverse Polarity Protection | Supported |
|---|
Environmental Limits| Operating Temperature | -25 to 60°C (-13 to 140°F) |
|---|
| Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
|---|
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
|---|
Standards and Certifications| EMC | EN 61000-6-2/-6-4 |
|---|
| EMI | CISPR 32, FCC Part 15B Class A |
|---|
| EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV | IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m | IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV | IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV | IEC 61000-4-6 CS: 3 V | IEC 61000-4-8 PFMF |
|---|
| Hazardous Locations | ATEX, Class I Division 2, IECEx |
|---|
| Radio | EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, ANATEL, MIC, NCC, RCM, SRRC, WPC, KC |
|---|
| Safety | EN 60950-1, UL 60950-1 |
|---|
| Vibration | IEC 60068-2-6 |
|---|
MTBF| Time | 570,854 hrs |
|---|
| Standards | Telcordia SR332 |
|---|
Warranty| Warranty Period | 5 years |
|---|
